 |
 |
 |
 |
 |
|
Data Acquistion Section
|
|
Ethernet, USB & Wireless Section
|
|
 |
 |
 |
 |
 |
 |
 |
 |
New Data Acquistion, Ethernet, USB & Wireless Products
|
 |
 |
 |
 |
|
 |
|
|
|

|
 |
|
Wireless Relative Humidity/Temperature Transmitter
Click to enlarge the image
|
|
 |
Measures Both Relative Humidity and Temperature in One Unit |
 |
Free Software Converts Your PC Into a Multi-Channel Chart Recorder or Data Logger |
 |
Low Power Operation and Sleep Mode For Long Battery Life |
 |
Transmits Relative Humidity, Ambient Temperature, Signal Strength and Battery Status in Real Time |
 |
Works with Any UWTC Series Wireless Receivers and Transceivers |
|
 |
 |
 |
 |
 |
| Last 10 Viewed Products |
[X] |
|
 |
 |
 |
 |
|
 |
|
|
View all of our related products Wireless Transmitters and Receivers
|
 |
|

|
Omega’s new Wireless Relative
Humidity transmitter features a
stand-alone, compact, battery
powered design that transmits
measurements back to a host
receiver up to 90 m away.
When activated the wireless
transmitter will transmit readings
continuously at pre set time interval
that was programmed by the user
during the initial setup. Each unit
measures and transmits: Relative
Humidity Reading, Ambient
Temperature, RF Signal Strength
and Battery Condition to the
receiver and is displayed on your
PC screen in real time using the
provided software. When used with
host receiver model UWTC-REC1
data from up to 48 wireless
transmitters can be received and
displayed. Each unit includes free
software that converts your PC into
a strip chart recorder or data logger
so readings can be saved and later
printed or exported to a spread
sheet file. When used with host transceiver model UWTC-REC2
wireless data from one unit can be
re-transmitted out of the receiver by
a wired connection as a analogue
voltage or current signal to interface
with a controller, PLC or data
acquisition board.
The UWTC-REC3 receiver will work with up to 32 transmitters and features an Ethernet interface. The unit serves it's own web pages displaying data in numeric or graphical format which can be read using a standard web browser over a local network or the internet.
SPECIFICATIONS
Temperature Range: -17 to 49ºC (2 to 120ºF)
Accuracy: ±1ºC (±1.8°F)
Relative Humidity Range: 2 to 98% RH
Accuracy: ±2.5% RH from 20 to 80%RH; ±3.5% RH below 20 and above 80% RH@ 25°C (76°F)
Operating Environment: -10 to 70°C (14 to 158°F)
Computer Interface: USB (one interface cable included with receiver)
Transmit Sample Rate: Programmable from 1 sample/minute to 1 sample/every 5 seconds Radio Frequency (RF) Transceiver
Carrier: ISM 2.4 GHz, direct sequence spread spectrum, license free worldwide (2.450 to 2.490 GHz -12 channels)
RF Output Power: 10dBm (10 mW)
Range of RF Link:
Up to 120 m (400'): outdoor line of sight
Up to 45 m (130'): indoor/urban
RF Data Packet Standard: IEEE 802.15.4, open communication architecture
Software (Included Free): Requires, Windows® 98, ME, 2000, XP, or Vista operating system connector internal
Battery: One 3.6 V lithium, 2.4 Ah capacity (AA) (included)
Battery Life (typical): (1 year) 1 sample/minute reading rate @ 25 (77°F)
Data Transmitted to Host: Relative humidity, ambient temperature, RF transmit strength and battery condition
Dimensions: 100 L x 50 W x 25 mm H (without antenna) (4 x 2 x 1")
Weight: 70 grams (2.46 oz)
Case: ABS plastic
Note: Because of transmission frequency regulations, these products may only be used in the United States, Canada, Europe and Singapore
|
|
|
To Order |
|
|
Note:
Because of transmission frequency regulations, these products may only be used in the United States, Canada, Europe and Singapore Comes with one 3.6 V lithium battery, programming software, measurement and logging software, mounting bracket and complete operator’s manual.
|
Ordering Example: (1) UWRH-2 Temperature and Humidity wireless transmitter, (1) UWTC-REC1 48 channel wireless receiver with USB interface cable and Windows software = £262.00
|
|
|
|
|
Related Links
|
|
|
Keywords: Wireless Relative Humidity/Temperature Transmitter
|
|
|
|
| |
|