Multipair Thermocouple Extension Cable |
| 4(*)X, 8(*)X, 12(*)X,16(*)X, 20(*)X and 24(*)X Series |
|
|
|
Click here for larger image.
|
|
|
|
|
|
|
 |
Common extension wire types are made up into standard multipair cables. Each conductor is covered with a polyvinyl jacket, nominal 0.38 mm (0.015") thick, and the pairs are individually twisted. Clear Mylar tape is then wrapped around the bundle of twisted pairs. A solid tinned-copper drain wire is laid over the bundle, which is covered with aluminium-backed Mylar tape to serve as an electro static shield. The drain wire provides a simple mechanical termination for the shield. The cable is then covered with a jacket of polyvinyl approximately 1.1 mm (0.045") thick.
As an added convenience, each standard cable contains an extra polyvinyl-clad solid tinned-copper wire for use as an earth connection, or to complete a communication or signal circuit. Standard cables are IEC colour-coded (contact sales for ANSI coloured cables). The individual pairs are marked 1-1, 2-2, etc., for easy identification. Insulation will withstand temperatures up to 105°C (221°F).
Overbraiding
Any standard item can be overbraided with tinned copper, stainless steel or Inconel upon request.
Special Orders
Multipair extension cable can be made to order with insulation to suit your installation requirements. Consult Sales Department on pricing and quantity minimums.
Multipair Pricing
Multipairs can be purchased in any quantity (minimum length 7.5m (25 feet)).
Minimum Bending Radius
4 pair cable: 6 times overall diameter.
8 pair cable: 10 times overall diameter.
Over 8 pair cable: 14 times overall diameter.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for other available models.
For complete product specifications see the Related Links section at the bottom of this page.
|
| |
|
|
Note:
Aluminium-backed Mylar wrap with 0.8mm dia. solid tinned-copper bare drain wire in contact with aluminium-backed Mylar
Ordering Example: (25) 4KIX20PP 25 feet of 4 pair type K wire, 0.8mm dia. conductors, with polyvinyl insulation = £72.50
|
 |
|
|
|
|
 |
 |
 |
|
|
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Number of Pairs (Twisted)
|
| |
Select
4 for 4 pairs
8 for 8 pairs
12 for 12 pairs
16 for 16 pairs
20 for 20 pairs
24 for 24 pairs
|
(2)
|
Thermocouple Type and Colour Code
|
| |
Select
KIX for Type K IEC Colours
JIX for Type J IEC Colours
TIX for Type T IEC Colours
KX for Type K ANSI Colours
JX for Type J ANSI Colours
TX for Type T ANSIColours
|
(3)
|
Gauge/Diameter Type
|
| |
Select
20 for 0.8mm dia solid (20 AWG)
24S for 7/0.2mm stranded (24 AWG)
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
 |
 |
|
|
|
|
|
|
|
|
|
Related Links - Product Spec Sheet
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Back to top |
|
|
|
