Cookies on the OMEGA websites We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
Common extension wire types are made up into standard multi-pair cables. Each conductor is covered with a PVC jacket, nominal 0.38 mm thick, and the pairs are individually twisted. Clear Mylar tape is then wrapped around the bundle of twisted pairs. A tinned-copper drain wire is laid over the bundle, which is covered with aluminium-backed Mylar tape to serve as an electrostatic shield. The drain wire provides a simple mechanical termination for the shield. The cable is then covered with a jacket of PVC approximately 1.1 mm thick.
As an added convenience, each standard cable contains an extra PVC-clad solid tinned-copper wire for use as an earth connection, or to complete a communication or signal circuit. The individual pairs are marked 1-1, 2-2, etc., for easy identification. Insulation will withstand temperatures up to 105°C.
Multipair Pricing
ANSI Coloured multipair cable can be purchased in any quantity (minimum length 25 feet) and is priced by the foot.
IEC coloured cable is supplied in fixed length spools, which are shown in the to-order table below.
Minimum Bending Radius
4 pair cable: 6 times overall diameter.
8 pair cable: 10 times overall diameter.
Over 8 pair cable: 14 times overall diameter.
Examples of pricing for popular options is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for other available options in ANSI colors only.
For complete product specifications see the Related Links section at the bottom of this page.
† All amounts shown in EUR, GBP, or USD Note: Aluminium-backed Mylar wrap with 0.8mm dia. solid tinned-copper bare drain wire in contact with aluminium-backed Mylar Ordering Example: (1) 4KIX24SPP-10M 10 metres of 4 pair type K wire, 7/0.2 mm dia. conductors, with polyvinyl insulation, £155.20
Part Number Builder
Build Your Part Number Below
Option Descriptions:
(1)
Number of Pairs (Twisted) select from: 4 for 4 pairs 8 for 8 pairs 12 for 12 pairs 16 for 16 pairs 20 for 20 pairs 24 for 24 pairs
(2)
Thermocouple Type select from: KX for Type K ANSI Colours JX for Type J ANSI Colours TX for Type T ANSIColours
(3)
Gauge/Diameter Type select from: 20 for 0.8mm dia solid (20 AWG) 24S for 7/0.2mm stranded (24 AWG)
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.
CLOSE
