The ACC101 accelerometer is low cost yet extremely durable. These accelerometers are constructed using high strength aluminium, and feature a rugged strain relief, ¼-28 stud mounting, an epoxy seal, and use the kind of dependable components usually found only in higher priced accelerometers.
SPECIFICATIONS Excitation: 2 mA nominal @ 24 to 30 Vdc, constant current (18 volt supply can be used but will limit amplitude range) Rated Output: 100 mV/g nominal @ 100 Hz Frequency Range: 3 Hz to 5 kHz (up to ±10 % rated output shift) Amplitude Range: ±80 g peak with ACC-PS3A power supply/amplifier Amplitude Linearity: ±1% up to 65 g peak Temperature Range: -18 to 82°C Temperature Sensitivity Effect:
-54 to 38°C ≤ 5% FS
38 to 121°C ≤ 8% FS Thermal Shock: 1.2 g /°C Transverse Sensitivity: 5% of axial maximum Maximum g Without Damage: 5,000 g peak Maximum g Without Clipping: ±80 g peak Mounted Resonance Frequency: >18 kHz Output Impedance: 50 Ω nominal Bias Voltage: 10 V nominal Base Strain: 0.002 g/microstrain max. Noise Floor (wideband): 0.00025 g (rms) Weight: 50 grams nominal (without cable) Material: Aluminium, hard anodised thermal insulating boot included Dimensions: 3.81 H x 2.54 cm hex base Connector: 3 metre integral coaxial cable with BNCM Mounting: 1/4-28 removable stud Mounting Torque max: 40 cm-kg (35 in-lb)
† All amounts shown in EUR, GBP, or USD Ordering Example: (1) ACC-PS3A-230VAC Power Supply, £318.00 plus (1) ACC101 Accelerometer, £178.00 plus (1) ACC-CB5-2 60 cm long output cable for amplifer. BNC to banana plugs, £23.50, £318.00 + 178.00 + 23.50 = £519.50