The Model CSMSTRV2 is a communications and control platform
designed for use with CS Series process control modules. The
CSMSTRV2 uses a proprietary high speed serial protocol to
communicate, via backplane connection, with up to 16 control
modules, providing PID control of any process including temperature
and pressure. Connect up to 16 Dual-loop PID control modules for
process control of 32 independent zones. PID temperature modules
also allow up to 32 ramp/soak segments per zone.
The Master provides high-speed RS232/422/485 communication
ports and an Ethernet port for connection to PCs and
motion controllers. An extensive list of
master and slave protocol drivers are available, including a serial
driver for Omega stepper motors, to allow the
CSMSTRV2 to share and exchange variable data with external
devices. The 10 Base-T/100 Base-TX Ethernet port can also
be used to connect and share data with other devices
at high speeds.
The CSMSTRV2 is programmed with Crimson software for
Windows® 2000 or later platforms. The software is an easy to use,
graphical interface which provides a means of communication
configuration, as well as commissioning and calibration of
Most Popular Models!
† All amounts shown in EUR, GBP, or USD Note: Controllers come with termination plug, terminal power block, and complete operator's manual. Ordering Example: (1) CSDIO14R 8 inputs 6 relay output module, £176.00 plus (1) CSMSTRV2 Controller, £220.00 plus (1) PSDR0100 Power supply, £92.00 , £176.00 + 220.00 + 92.00 = £488.00