Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
CLOSE
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

Economical 4-20 mA Loop-Powered Indicator

DPF300 Series

Economical 4-20 mA Loop-Powered Indicator | DPF300 Series

Economical 4-20 mA Loop-Powered Indicator

£360.66 DPF302

CE
  • 4-20mA Input, loop powered
  • DPF301 has a single display for rate or process
  • DPF302 has a dual display for rate and total
  • Scaling is programmable through keypad
  • Linear or square root extraction of input
Test Meters - Flow Measurement - View related products

Description

The DPF300 Series comprises 4 to 20 mA loop-powered indicators that display process variables in engineering units (Bar, litres/min, °C, %RH, etc.), with an adjustable decimal point for rate and total display. Because these indicators take power directly from the current loop, the user can perform programming on the front keypad; there are no jumpers to configure or potentiometers to scale. An internal lithium battery ensures that all programming is retained in memory, even when the loop power is disconnected. The DPF301 can be programmed for either a linear input or square root extraction for use with differential pressure flowmeters.

The DPF301 general purpose indicator features one 4½ digit rate display, while the DPF302 flow indicator has a dual, 2-line, 4½ digit rate display and 8-digit totaliser. The total count can be reset from either the front keypad or remotely via a contact closure.

The DPF300 Series indicators are available in a choice of panel-mount, IP66 (NEMA 4X), or explosion-resistant enclosures.

Specifications
Scalable Input Range: 3.8 to 21 mA
Rate Display (DPF301 and DPF302): selectable between 3½ and 4½ digits (19999), 9 mm high
Total Display (DPF302 Only): 8 Digits (99999999), 5 mm high
Rate Descriptors: /sec, /min, /hr or "blank"
Totaliser Unit Descriptors: Lit, Gal, FT³, M³, "blank"
Display Indications: Low battery and under/over range
Input: 4 to 20 mA DC, overcurrent protection to 60 mA, reverse polarity protected
Loop Voltage Drop: 6V max.
Internal Battery (Memory Only): 3V 250 mAh lithium (2-year standby life)
Housing:
    Standard: Round panel mount with IP66 sealed keypad membrane
    Optional: Glass-filled polycarbonate NEMA 4X (IP66) wall-mount enclosure, or wall/process mount explosion-resistant housing for NEMA 7, NEMA 4 (IP66), Class I, Groups B, C and D; Class II, Groups E, F and G
Ambient Temperature: -20 to 70°C
Extended Temp Option: -30 to 70°C
Accuracy (@ 20°C): 0.1% FS resolution, ±1 count
Temperature Drift: 50 ppm/°C typical, 200 ppm/°C worst case
Low Cutoff: A rate below 1% of selected scale (10% of square root scale) will assume the "set lo" value
Update Rate: For rate or total, once every 2 seconds
Weight:
    Basic Unit: 227 g
    With IP66 Enclosure: 454 g
    With Explosion-Resistant Housing: 1.6 kg

 

Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
DPF301
£336.61
Availability: 8 weeks
 
Panel mounted 4-20 mA loop-powered 4½ digit rate or process display
DPF301-NEMA
£463.81
Availability: 8 weeks
 
Wall/process mounted 4-20 mA loop-powered 4½ digit rate or process indicator with IP65 housing
DPF302
£360.66
Availability: 2 weeks
 
Panel mounted 4-20 mA loop-powered indicator with 4½ digit rate display and 8 digit totaliser
DPF302-NEMA
£500.86
Availability: 8 weeks
 
Wall/process mounted 4-20 mA loop-powered indicator with 4½ digit rate display and 8 digit totaliser. With IP65 housing
All amounts shown in EUR, GBP, or USD
Note: Comes with complete operator’s manual.
Ordering Example: (1) DPF301 Panel mounted 4-20 mA loop-powered 4½ digit rate or process display, £336.61
We noticed you are from the US. Visit your local site for regional offers and live support.