Standard heat or heater tapes are made from fine gauge stranded resistance
wires that are double insulated with braided fibreglass and knitted into
flat tapes for maximum flexibility. A heavy insulated heat tape is made
by taking a standard tape and braiding it between layers of fibreglass
yarn. Wide tapes are made from two or more standard tape heaters that
are sewn between two layers of fibreglass cloth.
Wide and Heavy Duty insulated tapes are good for direct contact on a conductive surface. Standard tapes are for non-conductive surfaces only.
SPECIFICATIONS Heating Elements: 36-40 gauge resistance wire. Lead Wires: Emerge from opposite ends of the tape as standard, for wires at the same end add suffix "LSE" to part number Heating Element Insulation: Double-braided fibreglass Dielectric Strength: In excess of 2000 V
Maximum Exposure Temperature: 482°C
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel.
Order By Part Number
† All amounts shown in EUR, GBP, or USD Note: All tapes 1/2" or wider are available in 240V without plug. Change the “1” in the part number that appears immediately before the “-” to “2” for 240V. Ordering Example: (1) FGS052-040 1.2m heater tape 240V, £21.00