Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
CLOSE
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

Water Meters for Totalization and Rate Indication with Pulse

FTB8007A through FTB8020B

Water Meters for Totalization and Rate Indication with Pulse | FTB8007A through FTB8020B

  • Flow Rates from 0.25 to 130 USGPM
  • 150 psi Maximum Operating Pressure
  • 40°C (105°F) Maximum Operating Temperature
  • Field Adjustable Pulse Output (Optional)
  • Not recommended for installation indoors or anywhere leakage may cause damage.
Turbine, Paddle Wheel & Positive Displacement Flowmeters - View related products

Description


IMPORTANT NOTE:
These water meters are not recommended for installation indoors or anywhere leakage may cause damage. Scaling is in U.S gallons

The FTB8000A Series meters use the multi-jet principle, which has been an internationally accepted standard for many years. This type of meter is known for its wide range, simplicity, and accuracy in lowquality water. The impeller is centered in a ring of jets, with inlet jets on one level and outlet jets on another. A gear train drives the register totalizer dials. For pulse output, one of the dials is replaced by a gear, which turns a magnet that is detected by an encapsulated sensor threaded into the outside of the lens. Pulse rate is determined by the gear and the dial on which the gear is placed. Changing the pulse rate requires no special tools and can be done in the field.

Mechanically, all FTB8000A meters are the same. The difference between the -PR, -PT, and standard models is in the sensor. -PR model meters use a solid-state, longlasting Hall-effect sensor, which requires power. -PT model meters use a two-wire reed switch. They provide a dry contact closure and do not require power. Basic FTB8000A meters totalize only and do not have an output. Never install water meters above or over areas where leakage would cause damage.
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
FTB8007B
Consult Sales  
Availability: 
 
 
3/4" NPT, 0.22 to 22 (GPM) Flow Range
FTB8010B
Consult Sales  
Availability: 
 
 
1" NPT, 0.44 to 52 (GPM) Flow Range
FTB8015B
Consult Sales  
Availability: 
 
 
1 1/2" NPT, 0.88 to 88 (GPM) Flow Range
FTB8020B
Consult Sales  
Availability: 
 
 
2" NPT, 1.98 to 132 (GPM) Flow Range
FTB8007B-PT
Consult Sales  
Availability: 
 
 
3/4" NPT, 0.22 to 22 (GPM) Flow Range, 1 Pulse per Gallon
FTB8010B-PT
Consult Sales  
Availability: 
 
 
1" NPT ,0.44 to 52 (GPM) Flow Range, 1 Pulse per Gallon
FTB8015B-PT
Consult Sales  
Availability: 
 
 
1 1/2" NPT, 0.88 to 88 (GPM) Flow Range, 1 Pulse per Gallon
FTB8020B-PT
Consult Sales  
Availability: 
 
 
2" NPT, 1.98 to 132 (GPM) Flow Range, 1 Pulse per Gallon
FTB8007B-PR
Consult Sales  
Availability: 
 
 
3/4" NPT, 0.22 to 22 (GPM) Flow Range, 10 Pulses per Gallon
FTB8010B-PR
Consult Sales  
Availability: 
 
 
1" NPT, 0.44 to 52 (GPM) Flow Range, 10 Pulses per Gallon
FTB8015B-PR
Consult Sales  
Availability: 
 
 
1 1/2" NPT, 0.88 to 88 (GPM) Flow Range, 1 Pulses per Gallon
FTB8020B-PR
Consult Sales  
Availability: 
 
 
2" NPT,1.98 to 132 (GPM) Flow Range, 1 Pulses per Gallon
All amounts shown in EUR, GBP, or USD
Note: Meters supplied with MNPT couplings and complete operator’s manual.
IMPORTANT NOTE:These water meters are not recommended for installation indoors or anywhere leakage may cause damage. Scaled in U.S gallons.
We noticed you are from the US. Visit your local site for regional offers and live support.