More information about how a Flow meter works in this link.
OMEGA’s Industrial Meter Turbines are identified by the internal diameter of the inlet and outlet. Model FTB891: 1/2 inch Model FTB892: 1 inch Each turbine is designed to work with onboard computer electronics and/or with one of several accessory modules that can interface to a wide variety of reporting and collecting devices. Liquid flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. The electrical signal provides the output necessary to operate the on-board computer electronics for local indication directly on the turbine or one of several accessory modules that transmit the signal to external equipment. Make sure the turbine model meets your specific needs. Refer to the Specifications Section and confirm the following: 1.The flow rate is within the limits of your model. 2.The liquid is compatible with the turbine’s wetted components. 3.The system’s pressure does not exceed the turbine’s maximum pressure rating.
Please download PDF file below for full product specifications
† All amounts shown in EUR, GBP, or USD Note: **Requires Signal Output Module “- FLSC790-P-ND”, ordered separately †Customer supplied pull-up resistor required, 820 ohm (min)
FTB890 Series - Industrial Grade PVDF and PVC Turbine Housing
FTB790 - FTB790 Series Turbine, Totalizer, Rate Meter