The LC8313, LC8400 and LC8450 Series Donut Load Cells are a space saving solution to applications requiring a large through-hole with limited space. With their rugged construction and design, these load cells are ideal for applications such as loading forces on large bolts or other suspended load applications. This series, with its all stainless steel construction and environmental protection, has proven its reliability in tough industrial applications.
SPECIFICATIONS Output: 2 mV/V nominal Input: 10 Vdc (15V max) Accuracy: ± 0.5%, linearity, hysteresis and repeatability combined Zero Balance: ±2.0% FSO Operating Temp Range: -54 to 121°C (-65 to 250°F) Compensated Temp Range: 16 to 71°C (60 to 160°F) Thermal Effects: Zero: ±0.009% FSO/°C Span: ±0.018% rdg/°C Safe Overload: 150% of capacity Ultimate Overload: 300% of capacity Deflection: 0.076 mm (0.003") nominal Input Resistance: 360 Ω minimum Output Resistance: 350 ±5 Ω Construction: 17-4 PH stainless steel Electrical: 1.5 m (5') 4-conductor shielded cable
† All amounts shown in EUR, GBP, or USD Note: All LC8000 series load cells include a NIST traceable calibration certificate. Ordering Example: (1) LC8450-313-5K is a 5,000 lb capacity load cell with 4.50, £338.00
Part Number Builder
Build Your Part Number Below
Outside Diameter select from: 8313 for 3.13 inch OD 8400 for 4.00 inch OD 8450 for 4.50 inch OD
Inside Diameter select from: 200 for 2.00 inch ID 213 for 2.13 inch ID 300 for 3.00 inch ID 313 for 3.13 inch ID
Load Range select from: 1K for 0-1000 lb range 3K for 0-3000 lb range 5K for 0-5000 lb range 10K for 0-10000 lb range 25K for 0-25000 lb range 50K for 0-50000 lb range 100K for 0-100000 lb range 200K for 0-200000 lb range
Note: All combinations may not be valid, check spec sheet for valid part numbers.