Omega’s PR-24 Series RTD probes feature
industry standard micro-DIN connectors for ease
of installation and fast replacement.
The IP65 rated connector with an all stainless
steel sheath and integral thread construction
is ideally suited for use in demanding industrial
Standard process threads are G1/4", G1/2", 1/4" NPT
and 1/2" NPT other threads are available on request.
† All amounts shown in EUR, GBP, or USD Note: Note: To order non-standard lengths change “6” or “150” in part number to length required in inches or millimetres respectively. Shorter lengths, no additional charge. Longer lengths call our Sales team.
PR-24 probes are supplied complete with micro-DIN mating connector with screw terminals for wire connection up to 0.34 mm². Ordering Example: (1) PR-24-3-100-A-G1/4-6-150 Pt100 4-wire Class A probe, 6 mm Dia., 150 mm L, G1/4 thread with copper sealing washer, £60.00
Part Number Builder
Build Your Part Number Below
Process Thread select from: G1/4 for G1/4 or 1/4 BSPP G1/2 for G1/2 or 1/2 BSPP 1/4 for 1/4 NPT 1/2 for 1/2 NPT
Sheath Diameter select from: Nothing(leave field blank) for Pipe plug style -3 for 3mm diameter sheath - G threads -6 for 6mm diameter sheath - G threads -1/8 for 1/8 diameter sheath - NPT threads -1/4 for 1/4 diameter sheath - NPT threads
Sheath Length select from: Nothing(leave field blank) for Pipe plug style -100 for 100mm sheath Length - G threads -150 for 150mm sheath Length - G threads -300 for 300mm sheath Length - G threads -3 for 3 sheath Length - NPT threads -6 for 6 sheath Length - NPT threads -12 for 12 sheath Length - NPT threads
Note: All combinations may not be valid, check spec sheet for valid part numbers.