Probe Is Supplied 24" Long and Designed To Be Cut-To-Length as Needed Using a Simple Tube Cutter.
Great For Use As Replacement Sensors, Can Be Combined With a Wide Variety Of Spring Loaded Fittings, Compression Fittings, Connection Heads, Thermowells, Connectors or Other Accessories to Fit a Wide Variety of Applications.
Contains a Precision 100 Ohm DIN Platinum Thin Film Element in Either Class A or Class B Accuracies.
Temperature Range: -50 to 260ºC
All Sensors Supplied to IEC60751/ASTM E-1137 Color Codes
This sensor is designed to provide the ultimate in adaptability. Its 24" length can be reduced in the field by cutting off the required tube length using a standard tube cutter. Combining the PRCTL sensor with Omega's wide variety of fittings and accessories can customize this sensor on the spot for a wide variety of RTD replacement probe or OEM RTD sensor probe applications.
This sensor is available in both Class A and Class B accuracies, in 3 wire standard (4-wire optional) in 1/4" diameter to fit many thermowells, or in 3/16", 6mm and 4.5mm diameters.
† All amounts shown in EUR, GBP, or USD Note: For 4 wire configuration change “2” to “3” in the model number and contact sales for pricing.
Part Number Builder
Build Your Part Number Below
Accuracy Class select from: A for Class A B for Class B
Sheath Diameter select from: 1/4 for 1/4 Diameter 3/16 for 3/16 Diameter M6 for 6mm Diameter M4.5 for 4.5mm Diameter
Sheath Length select from: 24 for 24 Length 600 for 600mm Length
Cable Length select from: 40 for 40 Length 1 for 1 meter Length
Note: All combinations may not be valid, check spec sheet for valid part numbers.