The PX790 Series sanitary pressure transducers utilize proven thin film technology and precision maching and electro-polishing to meet 3A standards.
SPECIFICATIONS Excitation: 10 to 36 Vdc unregulated reverse voltage protected with supply current <3 mA Output: 1 to 5 Vdc unregulated Zero Balance: ±1% FS Linearity: ±0.4% BFSL Hysteresis: +0.2% Repeatability: ±0.07% Stability: ±1% FS/year Durability: 100M cycles Operating Temperature: -29 to 82°C (-20 to 180°F) Compensated Temperature: -1 to 54°C (30 to 130°F) Thermal Effects: Span: ±0.04% FS/°F Zero: ±0.04% FS/°F Proof Pressure: 200% range Burst Pressure: 800% range Gage Type: Stainless steel diaphragm, diffused silicon sensor Vibration: <±0.1% FS effect for 20 g, 0 to 2000 Hz in any axis Shock: Less than ±0.05% FS effect for 100 g, 20 ms shock in any axis Position Effect: <0.1% FS Response Time: 5 ms Wetted Parts: 316L stainless steel electro-polished Case: 300 Series stainless steel Fill Fluid: USP grade 99.5% glycerin PX792-100G5V, with 508 mm (2") flange, $420, shown smaller than actual size. Pressure Port:Tri-ClampR style, 38.1 mm (11.2"), 508 mm (2") Electrical Connection: No. 24 AWG, 36" PVC, shielded, vented, UL approved Weight: 383 g (13.5 oz)
† All amounts shown in EUR, GBP, or USD Note: To order with 1 1/2" Tri-Clamp fitting change model number to PX791, no additional cost.
Part Number Builder
Build Your Part Number Below
Fitting Size select from: 2 for 2 inch sanitary fitting 1 for 1 1/2 inch sanitary fitting
Range select from: V30 for Vacuum to 30 psig V60 for Vacuum to 60 psig V100 for Vacuum to 100 psig 30 for 0-30 psig 60 for 0-60 psig 100 for 0-100 psig 200 for 0-200 psig 300 for 0-300 psig 500 for 0-500 psig 750 for 0-750 psig 1K for 0-1000 psig
Output select from: 5V for for 1-5 Vdc output I for 4-20 mA output
Note: All combinations may not be valid, check spec sheet for valid part numbers.