OMEGA’s PXM41 Series is a high accuracy, rugged, low cost 5V output, industrial pressure transducer. Its all stainless steel construction makes it suitable for the harshest environments. The PXM41 is available in gauge, absolute or sealed models. Three metres of four core screened cable is standard. Twist-lock style or Micro DIN connectors are also available. A wide selection of amplified voltage and current output models in the PXM41 family makes this a truly versatile family of industrial transducers.
SPECIFICATIONS Excitation: 10-35 Vdc Output: 0.5 to 5.5 Vdc; adj± 10% Zero Balance: 0.5 V; adj ±10% FSO Agency Approval: FM Intrinsically Safe: IS/I.II.III/1/CDEFG - Standard FM Hazardous Location IS/I/1/ABCD - Optional (4-20 mA output only) Accuracy: 0.25% FS Linearity and Hysteresis Combined Operational Temp Range: -47 to +121°C (-50 to +250°F) Compensated Temp Range: 16 to 71°C (60 to 160°F) Thermal Effects: Span: 0.0054% of Rdg/°C Zero: 0.009% of FSO/°C Proof Pressure: 150% of rated pressure Burst Pressure: 300% of rated pressure Wetted Parts: 17-4 PH Stainless Steel Pressure Port: G 1/4 Male or Female, G 1/8 Male or Female Electrical Connections: Style "0" = 3 m cable Style "1" = PTIH-10-6P connector Style "6" = micro DIN See Custom Configurations Mating Connector: Style "1" = PT06F-10-6S (not included) Style "6" = included Weight: 170 g (6 oz)
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
† All amounts shown in EUR, GBP, or USD Note: Contact sales for pricing and to order FM or MHSA approved transducers. For other options see the part number builder below. Ordering Example: (1) PXM41MD0-100BARG5V is a heavy duty metric pressure transducer with 0 to 100 Bar range, G 1/4 male fitting, 3 meter cable and 0.5 to 5.5 Vdc output, £400.00
Part Number Builder
Build Your Part Number Below
Pressure Fitting select from: MA for G 1/8 male MB for G 1/8 female MC for G 1/4 male MD for G 1/4 female
Electrical Termination select from: 0 for 3 metre cable 1 for PT1H-10-6P connector (mating connector sold separately) 6 for micro DIN connector (no shunt cal)
Pressure Range select from: 001 for 0-1 Bar 1.60 for 0-1.6 Bar 2.50 for 0-2.5 Bar 004 for 0-4 Bar 006 for 0-6 Bar 010 for 0-10 Bar 016 for 0-16 Bar 025 for 0-25 Bar 040 for 0-40 Bar 060 for 0-60 Bar 100 for 0-100 Bar 160 for 0-160 Bar 250 for 0-250 Bar 400 for 0-400 Bar
Units select from: A for Absolute Pressure G for Gauge Pressure S for Sealed Gauge Pressure
Output select from: 5T for 0 to 5 Volt Output 5V for 0.5 to 5.5 Volt Output 10T for 0 to 10 Volt Output I for 4 to 20 mA Output
Note: All combinations may not be valid, check spec sheet for valid part numbers.