The Model TCCTL “Cut-To-Length” thermocouples can be used for a wide variety of applications including:
For sudden or temporary measurements
Emergency replacements for existing thermocouples
The 1/4” and 6mm diameter thermocouples can be used in standard thermowells
With compression fittings and other accessories
These thermocouples can be customized to the needed length (75mm or 3” minimum) using a standard tube cutter, being careful not to cut into the extension wire insulation. Adding compression or spring loading fittings allows the thermocouple to be adapted to a wide variety of immersion type applications.
† All amounts shown in EUR, GBP, or USD Note: For 482°C (900°F) Fiberglass cable insulation, change “TT” to “GG” in model number (same price). For 540°C (1000°F) Fiberglass cable insulation, change “TT” to “HH” in model number and add $14 to the price. For a grounded thermocouple tip, change the “U” in the model number to “G” at no additional charge. Note, these cut to length thermocouples are not available in 3mm or 1/8" diameter versions.
Options: Add a standard sized connector by adding “-OTPW” to the model number for additional cost. Add a miniature connector by adding “-SMPW” to the model number for additional cost.
Accessories: Stainless Steel and Brass compression fittings are available for mounting, see “SSLK or BRLK” fittings.
Ordering Example: (1) TCCTL-J-14U-24-40-TT 1/4, £30.00 plus (1) TCCTL-J-6U-600-1-TT 6mm Diameter x 600mm Long Type J Thermocouple with 1 meter Long PFA Insulated Cable, £30.00, £30.00 + 30.00 = £60.00
Part Number Builder
Build Your Part Number Below
Thermocouple Type select from: J for Iron/Constantan K for Chromel/Alumel T for Copper/Constantan E for Chromel/Alumel N for Nicrosil/Nisil
Probe Outside Diameter select from: 1/4 for 1/4 Inch 3/16 for 3/16 Inch 6 for 6 mm 45 for 4.5mm
Junction Type select from: U for Ungrounded G for Grounded
Probe Length select from: 24 for 24 Inches 600 for 600 mm
Cable Length select from: 40 for 40 Inches 1 for 1 meter
Cable Type select from: TT for PFA Insulated (260C or 500F Max) GG for Fiberglass Insulated (482C or 900F Max) HH for Fiberglass Insulated (540C or 1000F Max) Not Available in Type T
Note: All combinations may not be valid, check spec sheet for valid part numbers.