The OMEGA® TCS-S-CB and TCS-H-CB Series
Thermocouple Sensors are designed for use in Sanitary or Hygienic
Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical
industries. These sensors are manufactured with 316L stainless steel
housings that meet the dimensional requirements of the ASME
BPE-2007 Standard, and are welded and processed to provide a clean,
smooth, 32 µinch or better surface finish in the wetted areas for
In addition to the standard 1½-16AMP process connection, these can be provided
in the following sizes and styles:
Model Number Code
1" and 1½"-16AMP
If you need a process connection that is not listed above, please contact our sales department for availability.
The probe stems are manufactured in two configurations; standard ¼" diameter probe for standard duty service,
and a stepped 3/8" to 3/16" diameter probe design for good response times in heavy duty applications.
The integral cable with molded strain relief allows for easy and direct connection
to your instrumentation. These sensors are also
available in RTD
and Thermistor styles to accommodate any process input requirement. In addition to the
standard 1½-16AMP flange design, these can be provided
in a wide variety of flange sizes and styles. If you need something a
little (or a lot) different, we can accommodate your needs.
Food process hygienic temperature sensors can be used to aid food safety inspection compliance and verification of time temperature control. Combined with a chart recorder model CTXL you can temperature monitor a CCP ( Critical Control Point) or sanitation time and move toward a HACCP (Hazard Analysis Critical Control Point) compliance plan.
This sensor is stocked with Type "T" or Type "J" Thermocouples standard, but are available in any thermocouple type:
Color Code (Red is Negative)
Blue/Red with Brown Jacket
Purple/Red with Brown Jacket
Yellow/Red with Brown Jacket
White/Red with Brown Jacket
† All amounts shown in EUR, GBP, or USD Note: Please contact sales for different probe/cable lengths and flange diameters. Ordering Example: (1) TCS-TU-S-0300-D1-CB-120 Ungrounded Type, £88.00
Part Number Builder
Build Your Part Number Below
Thermocouple Type select from: T for Type T J for Type J K for Type K E for Type E
Probe Diameter select from: S for Standard Duty 1/4 inch H for Heavy Duty 3/8 to 3/16 inch stepped probe
Probe Length select from: 0300 for 3 inch length 0400 for 4 inch length 0500 for 5 inch length 0600 for 6 inch length
Sanitary Flange (Cap) Size select from: D1 for 1-1/2 inch Tri-Grip Flange (standard) B1 for 3/4 inch 16AMP Tri-Grip Flange E1 for 2 inch 16AMP Tri-Grip Flange F1 for 2-1/2 inch 16AMP Tri-Grip Flange G1 for 3 inch 16AMP Tri-Grip Flange H1 for 4 inch 16AMP Tri-Grip Flange
Lead Wire Cable Length select from: 120 for 120 inch/10 ft (standard) 144 for 144 inch/12 ft 180 for 180 inch/15 ft 240 for 240 inch/20 ft
Note: All combinations may not be valid, check spec sheet for valid part numbers.