Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
CLOSE
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

  Discontinued - Triaxial Accelerometer

ACC301A

3 axis accelerometer | ACC301A

3 axis accelerometer

  • 10 mV/g Output per Axis
  • Ideal for Monitoring Vibration in Three (X-Y-Z) Planes
  • Weighs Only 13.6 Grams Due to Titanium Construction
  • Very Low 15 uV noise floor
Dynamic Measurement - View related products

Description

Click on this link if you need more information about an accelerometer.

OMEGA’s model ACC301A triaxial accelerometer is ideal for lightweight single-point monitoring of vibration in three (X-Y-Z) planes. This accelerometer has a very low noise floor and a wide frequency range of up to 10 kHz at 3db. The ACC301A accelerometer weighs only 13.6 grams, yet its titanium construction makes it very rugged.

SPECIFICATIONS
Excitation: 2 mA nominal @ 15 to 30 Vdc, 1 to 6 mA max constant current
Sensitivity @ 100 Hz, ±5%: 10 mV/g - 1.02 mV/(m/s²)
Frequency Range ±5%: 3 Hz to 7 kHz
Frequency Range ±10%: 2 Hz to 8 kHz
Frequency Range ±3db: 1 Hz to 10 kHz
Turn on Time (2% of final bias): <5 Seconds
Amplitude Range @22°C: ±500g
Mounted Resonance:>25 khz
Transverse Sensitivity:<5%
Temperature Range: -40 to 121°C
Base Strain: 0.0005 g peak/ustrain
Shock Limit: 5,000 g
Noise Broadband 2.5 Hz to 25 kHz: 1500 u (rms)
Noise Spectral 10 Hz: 100 ug/sqrt Hz (rms)
Noise Spectral 100 Hz: 25 ug/sqrt Hz (rms)
Noise Spectral 1000 Hz: 10 ug/sqrt Hz (rms)
Output Impedance: 1000 Ω
Isolation:Isolated, >100 Meg Ω
Noise Rejection (EMI/RFI):>52 db
Bias Voltage: 7 Vdc
Weight: 13.6 grams nominal (without cable)
Case Material: Titanium
Design: Isolated Compression
Environmental Seal: Splashproof epoxy
Dimensions: 21 x 21 w x 28 mm d
Connector: Side 4-pin, ¼-28 female termination, cable sold separately (order Model No. ACC-CB3-6)
Mounting: 10-32 removable stud
Mounting Torque Max: 2.2 N-m (20 in-lb)
All amounts shown in EUR, GBP, or USD
Ordering Example:  (1) ACC-CB3-6 Cable for connecting accelerometer to PSU, £285.75  plus (1) ACC-PS4A-230VAC Power Supply, £755.00 , £285.75 + 755.00 = £1,040.75
We noticed you are from the US. Visit your local site for regional offers and live support.