OMEGALUX® rope heaters apply heat to tubing with diameters as
small as 1/8" (3.2 mm). Featuring a maximum allowable operating
temperature of 482°C (900°F), the FGR series rope heaters
can be wrapped around either conductive or non-conductive surfaces.
Each end terminates with 600 mm long fibreglass insulated lead
wire. These rope heaters are very similar to our heater tapes. Please review our
tape heaters for your application needs.
Maximum Allowable Temperature: 482°C (900°F) Suitable for Use on Conductive Surface: Yes Resists Moisture, Vapour, Or Chemicals: No Standard Diameter: 5 mm (3/16 inch) Voltage: 120 or 240 Volt ac Linear Wattage: 4 Watts/in. approx. Heater Length: 3, 6, 8, or 10 feet (0.9, 1.8, 2.4 or 3.0 m) Lead Length: 24 inches (609 mm) Termination: Stripped leads
† All amounts shown in EUR, GBP, or USD Note: Other wattages also available.