integral or remote signal conditioner

FLSC-C1-LIQ Series

^£1,118.23 FLSC-C1-LIQ

PLACE ORDER

Loop Powered 4 to 20 mA
Signal Linearization
Factory Configuration Available
Windows® Configuration Software*

Turbine, Paddle Wheel & Positive Displacement Flowmeters - View related products

Description

The FLSC-C1-LIQ is a microprocessor controlled 2-wire 4 to 20 mA transmitter. The FLSC-C1-LIQ converts a low level, frequency signal from a flow sensor into an analog 4 to 20 mA output. The output is proportional to the flow rate.

Specifications
Input Signal Type: Magnetic pickup
Input Frequency Range: 0.2 Hz to 4 KHz
Signal Level: 10 mV rms to 30 Vdc
Power Supply: Loop power 10 to 30 Vdc Reverse polarity protected
Loop Burden Voltage: 8.5V
Analog Output: 4 to 20 mA 24 mA overflow condition
Load Resistance: Maximum 650 Ω at 24 Vdc
Accuracy: ±0.02% of full scale
Temperature Drift: 40 ppm/degree C
Communications: RS232 port for configuration and diagnostics
Operating Temperature: -40 to 85°C (-40 to 185°F)
Humidity: 0 to 90% non-condensing
Enclosure: Extruded Aluminium
Regulatory: CE Compliant Up to 20 point linearization. Windows® Configuration Software* available for free download at omega.com/ftp(cable sold separately)

FLSC-C1-LIQ are designed for integral mounting on the FTB-100, FTB-200, and FTB-400 Series liquid turbines.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

FLSC-C1-LIQ

£1,118.23

Availability: 4 weeks

Loop-powered signal conditioner, 4 to 20 mA

OM-CONV-USB

£19.29

Availability: 2 weeks

USB to RS232 converter

FLSC-C-CABLE

£41.54

Availability: 4 weeks

Molex to 9-pin "D" connector

† All amounts shown in EUR, GBP, or USD
Note: Comes complete with operator’s manual.

* Available for free download, cable sold separately.