Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
CLOSE
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

Oval Gear Totaliser for Viscous Liquids

FPDM3000

Totaliser for Viscous Liquids | FPDM3000

Totaliser for Viscous Liquids

£1,333.95 FPDM3004

CE
  • Aluminium or Stainless Body
  • Higher Temperatures up to 120ºC (“-HT” Option)
  • NPT or BSP Threads
  • DIN, JIS or ANSI Connections (1" and Larger Sizes)
Turbine, Paddle Wheel & Positive Displacement Flowmeters - View related products

Description

The FPDM3000 Series positive displacement oval gear flow meters are affordable and accurate. One primary feature is the ability to maintain consistent accuracy despite changing viscosity conditions. The meter’s solid construction and excellent dynamic response are well suited to the measurement of many viscus fluids. Three choices of wetted material combinations are available for compatibility with a large variety of liquids. Since there is no need for straight run piping upstream or downstream of the flowmeter, the FPDM3000 flowmeters are simple to use and to install. The meter has good resolution and high accuracy at low flow rates.

Specifications
Accuracy: ±1% of reading
Repeatability: ±0.03%
Fitting Type
    NPT: Female
    BSP: “-BSP” option
    DIN: “-DIN” option
    JIS: “-JIS” option
    ANSI: “-ANSI” option
Total: Resettable
Accumulated-Total: Non-resettable
Minimum Viscosity: 1cPs
Maximum Viscosity: 1000 cPs standard
Strainer Size: 200 mesh (74ì)
Mounting: Shafts must be in a horizontal plane
Mounting: Pipe
Liquid Temperature: -40 to 80°C (-40 to 176°F); -40 to 120°C (-40 to 248°F) (“-HT” option)
Maximum Pressure: 3400 kPa (500 psi)
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
FPDM3204
£2,880.00
Availability: 8 weeks
 
Pipe Size 1⁄2", Flow Range; <5cPs 3 to 25 LPM (0.8 to 6.6 GPM), >5cPs 2 to 30 LPM (0.5 to 8 GPM)
FPDM3205
£3,686.00
Availability: 8 weeks
 
Pipe Size 1", Flow Range; <5cPs 10 to 100 LPM (2.6 to 26 GPM), >5cPs 6 to 120 LPM (1.6 to 32 GPM)
FPDM3006
£2,517.07
Availability: 2 weeks
 
Pipe Size 11⁄2", Flow Range; <5cPs 15 to 235 LPM (4 to 62 GPM), >5cPs 10 to 250 LPM (2.6 to 66 GPM)
FPDM3206
£5,814.00
Availability: 8 weeks
 
Pipe Size 11⁄2", Flow Range; <5cPs 15 to 235 LPM (4 to 62 GPM), >5cPs 10 to 250 LPM (2.6 to 66 GPM)
FPDM3007
£4,228.00
Availability: 8 weeks
 
Pipe Size 2", Flow Range; <5cPs 15 to 500 LPM (4 to 130 GPM), >5cPs 16 to 500 LPM (4 to 130 GPM)
FPDM3207
£10,074.00
Availability: 2 weeks
 
Pipe Size 2", Flow Range; <5cPs 15 to 500 LPM (4 to 130 GPM), >5cPs 16 to 500 LPM (4 to 130 GPM)
All amounts shown in EUR, GBP, or USD
Note: Standard models totalise in US Gallons. For units that totalise in Litres add suffix -L to the model number; no additional charge.
For units with BSP connections add “-BSP” to the model number no additional charge.
For units with DIN flanges add “-DIN” to the model number for an additional charge.
For units with JIS flanges add “-JIS” to the model number for an additional charge.
For units with ANSI flanges add “-ANSI” to the model number for an additional charge.
For FPDM3200/FPDM3300 units with high viscosity rotors add “-HV” to the model number for an additional charge.
For FPDM3200 units made for higher temperatures add “-HT” to the model number for an additional charge.
We noticed you are from the US. Visit your local site for regional offers and live support.