Electronically Controlled Proportional Valves

FSV10 Series

^£600.33 FSV12

PLACE ORDER

Pulsewidth-Modulated Control Circuit
Accepts 0 to 5 Vdc or 4 to 20 mA Setpoint Inputs
Made of Corrosion- Resistant 316 and 416 SS/FKM

Valves - View related products

Description

The FSV10 Series electronic proportioning solenoid valves can control the flow of a wide variety of gases and liquids. The variablestroke electromagnetic valve is pulsed by the driver electronics, maintaining the correct magnetic flux level in the solenoid and holding flow at the level of the analog input setpoint signal. A TTL-level input allows the valve to be shut off regardless of analog setpoint signal.
The output power level of the driver electronics is jumper selectable for cooler, more efficient operation. The FSV10 Series requires 12 to 30 Vdc, supplied by the optional FSV-PW 110 Vac plug-in power supply or via the 9-pin D connector (included). These valves come with 8 inches of wire, which must be soldered to the 9-pin D connector.

SPECIFICATIONS
Turndown Ratio: 100:1
Response Time: 500 msec max
Fluid Temperature Range: -10 to 54°C (14 to 130°F)
Typical Valve Surface Temperature: 54°C (130°F) with 24 Vdc power input
Required Power Input (Not Included): 12 to 30 Vdc, 1 A @ 12 Vdc; 0.5 A @ 24 Vdc via 9-pin D connector or DC power jack
Connection: ¼" compression fittings
Setpoint Input Signal: 0 to 5 Vdc or 4 to 20 mA
Valve Dimensions: 87.6 H x 87.6 L x 25.4 mm W (3.45 x 3.25 x 1.00") including compression fittings
Driver Electronics: 7.62 W x 7.62 D x 25.4 mm H (3 x 3 x 1")
Materials in Fluid Contact: 316 and 416 SS, FKM O-rings
Maximum Pressure: 500 psig (3448 kPa)
Maximum Differential Pressure: 50 psid (345 kPa); 35 psid (241 kPa) for FSV15
Leak Integrity: 1 x 10^-9 sccs; helium, individually tested
Ambient Temperature: 0 to 50°C (32 to 122°F)
CE Compliance: EMC Directive
89/336/EEC EN55011:1991; Group 1,
Class A EN50082-2:1995

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

FSV11

£600.33

Availability: 2 weeks

0.51(0.02) orifice size, 0.009 Cv, 3500 mL/min Air, 125 mL/min Water at Maximum Flow

FSV12

£600.33

Availability: 7 weeks

1.02 (0.04) orifice size, 0.033 Cv, 13,000 mL/min Air, 400 mL/min Water at Maximum Flow

FSV12-EPR

£600.33

Availability: 7 weeks

1.02 (0.04) orifice size, 0.033 Cv, 13,000 mL/min Air, 400 mL/min Water at Maximum Flow - Ethylene Propylene Rubber seal

FSV13

£600.33

Availability: 7 weeks

1.4 (0.055) orifice size, 0.055 Cv, 21,500 mL/min Air, 700 mL/min Water at Maximum Flow

FSV14

£600.33

Availability: 7 weeks

1.6 (0.063) orifice size, 0.068 Cv, 25,000 mL/min Air, 850 mL/min Water at Maximum Flow

FSV15

£550.76

Availability: 2 weeks

3.18 (0.125) orifice size, 0.24 Cv, 100,000 mL/min Air, 2873 mL/min Water at Maximum Flow

† All amounts shown in EUR, GBP, or USD
Note: Comes complete with operator’s manual, driver module and 9-pin D connector.
*Based on 10 psig (690 mbar) differential pressure.