Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

Positive Displacement (PD) Flow meters


Positive Displacement Flow meters | FTB3001,FTB3002

Positive Displacement Flow meters

£2,440.00 FTB3002

  • Toothless Oval Gear Construction (Patented)
  • High Accuracy
  • Compact Design
  • High Resolution Electronic Output
  • Temperatures to 232°C
  • Pressure Rated to 3000 PSIG with 1" NPT Fitting Standard
  • Multiple Bearing Options
  • 316 Stainless Steel Construction (Standard)
  • No Special Gears Needed for High Viscosity
  • Linearity Unaffected by Viscosity Changes
  • 1" MNPT End Fitting (Standard), Flange Optional
Turbine, Paddle Wheel & Positive Displacement Flowmeters - View related products


The oval shaped smooth gears in the FTB-3000 Series are used to displace a precise volume of fluid, which is passed through the measurement chamber during each revolution. The toothless design, working with the fluid being measured, provides a complete viscous seal within the measuring chamber. This sealing effect provides for greater flow measurement accuracy. The displacement of the fluid is translated via a magnetic or Hall effect pick-up into a pulse output that is proportional to the flow.

The unique design of the FTB-3000 oval gear meter incorporates two smooth (toothless) oval gears positioned 90 degrees out of phase. The measurement gears are held together by two timing gears. The standard meter contains no seal between the measurement chamber and the timing chamber.The timing gears have a pitch diameter equal to the outside diameter of the measurement gears. The flow through the meter measurement chamber follows the path of least resistance. Therefore, no liquid passes through the centre cavity between the measurement gears. The fluid is displaced from the inlet to the outlet via the area between the smooth oval gear and the inner diameter of the meter housing. Conventional oval gears have teeth that mesh. One of the advantages of smooth oval gears is that the viscous flow does not get trapped or squeezed between the gears. Typically, oval gears need to have cuts made in the teeth to allow high viscosity fluids to pass. These cuts result in a decrease in accuracy. Standard bearings are shielded ball bearings. Optional tungsten carbide sleeve bearings may be selected for aggressive liquids.

The DPF700 series meters shown in the accessories table below will take the output from the FTB-3000 series and provide rate or total indication in your required units.

Place Order(Specify Model Number)
Part Number/ Desc.
Availability: 9 weeks
7.6 to 94 LPM. Magnetic pick-up, -268 to 232°C
Availability: 9 weeks
.076 to 94 LPM Hall Effect, 6 to 24 Vdc, -40 to 150°C
Availability: 1 week
6 digit, 1/8 DIN panel meter for Rate or Total, 85 to 260 Vac powered, with dual relay outputs
All amounts shown in EUR, GBP, or USD
Note: Models also available with 150 or 300lb flanges. Please contact sales for additional pricing or to order.
Comes with complete operator’s manual and 10-point NIST calibration.
Ordering Example: (1) FTB3002 Hall effect output, max temp. 150°C unit with operator’s manual and 10-point NIST calibration, £2,440.00

Product Manuals:

Download FTB3000 SERIES - Postive Displacement Meters
Download DPF700
We noticed you are from the US. Visit your local site for regional offers and live support.