This product is no longer available. Please see LV110-Series Drum Level Indicators as a possible replacement
The LV160 Series high level
indicators have a 2 NPT mounting,
making them ideal for use in
underground and aboveground
storage tanks. When mounted
vertically at the tank top, the unit
reliably indicates high liquid level.
The unit’s rugged construction and
multiple design options make it
adaptable for just about any
environment. The indicator is
available in brass or stainless steel,
making it suitable for use with a
wide range of liquids.
Adjustable versions are available for
varying tank sizes. A special cinch
nut on the mounting allows the stem
to travel up or down to fine-tune
actuation points. The extent of the
adjustment depends on the unit’s
length and distance from the
mounting to the highest float stop.
The LV160 Series is offered in
integral 1 foot lengths. For other
lengths, adaptor systems are
available. They consist of 2 parts:
the LVR-CBR coupling (2 x 2" FNPT)
and an LVR-B pipe nipple (2 x 2" MNPT)
of various lengths to change the
insertion depth of the sensor. When
using the adaptors, retaining clip pliers
are required to remove the float for
Stem and Mounting: Brass or 316 stainless steel
Float: BUNA or 316 stainless steel
Operating Temperature: Brass w/BUNA: Water up to 82.2°C (180°F) Oil -40°C to 110°C (-40°F to 230°F). 316 SS -40°C to 148.9°C (-40°F to 300°F)
Pressure Limitations: Up to 150 psig for BUNA float units or when used with 316SS adaptors; up to 750 psig for 316SS float units.
Switch Rating: 20 VA, 120-240 Vac pilot duty; 20 W, 50-240 Vdc resistive
Cable: 24" 2-Conductor PVC jacketed
Weight: 1½ lbs + ¼ lb. per foot for indicators; 1½ lbs for LVR-CB
† All amounts shown in EUR, GBP, or USD
Note: Comes complete with operator’s manual.
For units with adjustable mount, add suffix “-A” to model number, add $70 for brass units, $100 for 316 SS.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)