Click on this link if you need more information about Level sensor.
OMEGA’s LVCN318 ultrasonic level
transmitter and controller provides
continuous level measurement up to
5.5 metres with a 4 to 20 mA signal
output, and is configured with our free
software via USB. The
level sensor has 4 programmable
relays with selectable hysteresis and
fail-safe logic. The embedded level
controller can lower cost by replacing
external control hardware. This
non-contact liquid level sensor is
ideally suited for corrosive, sticky or
dirty liquids, and is widely selected
for day tank, skid, IBC, sump and
process tank level applications.
Specifications Range: 5.5 m (18') Accuracy: ±0.2% of range Resolution: 2 mm (0.079") Dead Band: 20 cm (8") Beam Width: 7.62 cm (3") Configuration: USB PC Windows® USB 2.0 Memory: Non-volatile. The level sensor is configurable via our free PC software and USB. Supply Voltage: 24 Vdc (loop) Consumption: 0.5W Loop Resistance: 400Ω max Signal Output: 4 to 20 mA, two-wire Signal Invert: 4 to 20 mA or 20 to 4 mA Signal Fail-Safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last Contact Type: (4) SPST relays Contact Rating: 60 VA, 1A maximum Contact Fail-Safe: Power loss; hold last Echo Loss: Open, close or hold last Hysteresis: Selectable Process Temperature: -7 to 60°C (20 to 140°F) Temp Comp: Automatic Ambient Temperature: -35 to 60°C (-31 to 140°F) Pressure: Maximum Working Pressure = 2 bar (30 psi) Enclosure Rating: Type 6P, encapsulated, corrosion resistant and submersible Encl Material: Polycarbonate Trans Material: PVDF Cable Jacket Material: Polyurethane Cable Type: 9-conductor, shielded Cable Length: 1.2 m (48") Process Mount: 2" NPT or G2 (specifiy) Mount Gasket: FKM Classification: General purpose Compliance: CE, RoHS
† All amounts shown in EUR, GBP, or USD Note: Comes complete with mounting gasket, and operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.