SV-330 Series 2-way solenoid
valves are direct-acting, featuring an
epoxy-encapsulated coil, a brass or
stainless steel body, and Viton® seal
material. The -10 to 130°C
temperature range is ideal for
neutral media such as compressed
air, water, oils, and greases without
additives (viscosity of approximately
2.3 x 10-4 ft2/s). Electrical connection
is by conduit plug.
SPECIFICATIONS Mounting Position: Any (preferably with solenoid system upright) Max Ambient Temp: 54°C Voltage Tolerance: plusmn;10% Power Consumption in Warm State: AC: 35 to 40 VA (inrush), 16 VA/10 W (hold) DC: 10 W Opening Time: AC: 10 to 20 ms DC: 20 to 80 ms depending on orifice and pressure Closing Time: 20 to 30 ms (AC and DC) Times measured at outlet A on energizing/ de-energizing until attainment of pressure rise to 90%/pressure drop to 10% at a working pressure of 85 psi. Cycling Rate: Approx. 1000 cpm Duty Cycle: Continuous (100%)
† All amounts shown in EUR, GBP, or USD Note: Not all output options are available on all models. Please consult Omega sales for available models.