The compression load cells of the OMEGA’s LCM900 Series are bolt force sensor designed to measure the clamping force of a bolt. With excellent long term stability and all stainless steel construction, the LCM900 Series delivers high reliability in severe industrial environments. This unit is designed to operate by mounting on a flat surface between two mounting washers (included).
SPECIFICATIONS Excitation: 5 Vdc (10 V max) Output: 2 mV/V nominal Accuracy: ±3.5% FSO Linearity, Hysteresis and Repeatability Combined Zero Balance: ±4% FSO Operating Temp Range: -54 to 93°C (-65 to 200°F) Compensated Temp Range: 16 to 71°C (60 to 160°F) Thermal Effects: Zero: ±0.018% FSO/°C Span: ±0.036% of Rdg/°C Safe Overload: 130% of Capacity Ultimate Overload: 150% of Capacity Bridge Resistance: 120 .Nominal Construction: Stainless Steel Electrical Connection: 1.2 m (4 ft) Insulated Shielded Cable
† All amounts shown in EUR, GBP, or USD Note: Supplied complete with load washers, 2-point calibration certificate and instruction sheet. Ordering Example: (1) LCM901-13-130KN 0-130 kN capacity bolt sensor for 13 mm bolt with 1.2 metre cable with stripped ends, £226.00 plus (1) LCM901-130KNWS Spare Set of Mounting Washers for 130KN Bolt Sensor, £21.25, £226.00 + 21.25 = £247.25