OMEGA’s PX409 Series high accuracy vacuum transducers
have a uni-directional output that measures gauge vacuum, negative gauge pressure.
Ambient pressure = 0 and output increases as pressure decreases below ambient.
The transducers have all
stainless steel wetted parts and
welded construction and premium
temperature compensation which
makes them suitable for use in
tough industrial environments.
Vacuum models measure negative
gauge pressure with increasing output
for increasing negative pressure.
Ranges are from 0 to -10 inH2O to 0 to -15 psi
with uni-directional outputs of 10 mV/V,
0 to 5 Vdc and 4 to 20 mA (ambient
set at 4 mA).
Output: Millivolt: 0 to 10 mV/V for vacuum, ±10 mV/V for compound Amplified Voltage: 0 to 5 Vdc for vacuum, ±5 Vdc for compound Current Loop: 4 to 20 mA (12 mA at 0 psig on compound ranges) Power Requirements: Millivolt: 5 to 10 Vdc (2 mA @ 10 Vdc) Amplified Voltage: 10 to 30 Vdc @ 10 mA Current Loop: 9 to 30 Vdc [max loop res = [(Vs-9) x 50] [9 to 20 Vdc above 105°C] Accuracy (Combined Linearity, Hysteresis and Repeatability): ±0.08% BSL max Zero Balance: ±0.5% FS typical 1% max (1% typical, 2% max for ranges 1 psi and below) Span Setting: ±0.5% FS typical 1% max (1% typical, 2% max for ranges 1 psi and below) calibrated in vertical direction with fitting down Operating Temperature Range: -45 to 121°C [-45 to 115°C for voltage or current outputs] Compensated Temperature: Ranges >5 psi: -29 to 85°C (-20 to 185°F) Ranges ≤5 psi: -17 to 85°C (0 to 185°F) Thermal Effects Zero (@ 0 psig Over
Compensated Range): Ranges >5 psi: ±0.5% span Ranges ≤5 psi: ±1.0% span Thermal Effects Span (Over
Compensated Range): Ranges >5 psi: ±0.5% span Ranges ≤5 psi: ±1.0% span Long Term Stability (1-Year): ±0.1% FS typical
Shock: 50 g 11 mS half sine, vertical and horizontal axis Vibration: 5-2000-5 Hz 30 minute cycle, Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis Response Time: <1 ms Bandwidth: DC to 1 kHz typical Proof Pressure (positive direction): 10 inH2O: 10 times full scale 1 psi: 6 times full scale 2.5 psi and Higher: 4 times full scale (Negative direction 4 times or 1 atmosphere whichever is greater) Burst Pressure: 10 inH2O to 5 psi: 1000 psi 15 and Higher: 3000 psi Electrical Termination: PX409: Integral 2 m cable PX419: mini-DIN PX429: Twist lock Mating Connectors: PX419: CX5302 (included) PX429: PT06F10-6S (sold separately) Environmental Protection: PX409: IP67 PX419 and PX429: IP65 Wetted Parts: 316 SS Pressure Port: ¼-18 NPT male Calibration: Comes with 5 point calibration certificate (positive readings only for compound ranges) Weight: 115 to 200 g depending upon configuration
† All amounts shown in EUR, GBP, or USD Note: Comes complete with 5 point calibration certificate, (zero is ambient pressure). Ordering Example: (1) PT06F10-6S Mating twist-lock connector, £18.75 plus (1) PX429-015VI 4 to 20 mA output, 0 to -15 psi vacuum, twist-lock termination, £420.00, £18.75 + 420.00 = £438.75
Part Number Builder
Build Your Part Number Below
Electrical Termination select from: PX409 for 3 m Cable PX419 for mini-DIN PX429 for Twist-lock (mating connector sold separately) PX459 for M12 Connector (mating connector sold separately)
Ranges Vacuum (Negative Gage) select from: 10W for 0 to -10 INH2O 001 for 0 to - 1 psi 2.5 for 0 to - 2.5 for psi 005 for 0 to -5 psi 015 for 0 to - 15 psi
Electrical Output select from: V for 10mV/V 5V for 0-5 Volt Output 10V for 0-10 Volt Output I for 4-20 mA Output
Note: All combinations may not be valid, check spec sheet for valid part numbers.