Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
CLOSE
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

OMEGABUS® Single channel data acquisition system & Digital Transmitters

D1000 and D2000

Single channel data acquisition system | D1000 and D2000

Single channel data acquisition system

£278.24 D1101

CE
  • Single channel data acquisition system with isolated Inputs
  • Complete Sensor To RS-232C or RS-485 Interface
  • Input Modules for Thermocouples, RTDs, Voltages, Currents, Pulse and Frequency, and Bridge Inputs
  • RS-485 Format Permits Remote Communications Up to Four Thousand Feet
  • D2000 Series Provide Linearization of Non-Standard Sensors
  • Connect Up To 32 Modules On One Cable, Up to 124 Using a Repeater
  • Alarm Outputs Standard
  • Continuous Self Calibration, No Adjustment Requirements
USB, RS232, RS485 and Ethernet Data Acquisition Systems - View related products

Description

The D1000 and D2000 Series single channel data acquisition system and digital transmitters are a complete family of easy to use interface modules for personal computers and other processor based equipment with standard serial I/O ports. The modules convert analog input signals to engineering units and transmit, in ASCII format, to any host computer with a standard RS-232C or RS-485 port. This modular design enables anyone familiar with a personal computer to construct a flexible and cost effective data acquisition system. These modules can measure temperature, pressure, flow, voltages, currents and various types of digital signals.
The D1000 series provide direct interface to a wide variety of sensors and perform all signal conditioning, scaling, linearization and conversion to engineering units.

Each module also provides digital I/O lines for controlling devices through solid state relays or TTL signals. These digital I/O lines along with integral limit setting capability provide alarm and control outputs. With the exception of the D1400 RTD and D1500 bridge modules, every D1000 module contains an on-board event counter. The event counter will count up to ten million transitions on the digital input line. All user selectable options (address, baud rate, alarms, etc.) are done through the communications port and stored in nonvolatile memory thereby eliminating switches or external adjustments of any kind.

The D2000 series of user programmable single channel data acquisition and control modules allow direct interface of non-linear analog sensors to computers with serial I/O ports. Use of these modules enables downloading up to 23 breakpoints through the communications port. With these breakpoints the user can program a module to virtually any transfer function.

Ranges for D1000 Modules

Digital Inputs/Outputs
RS-232
Output
RS485
Output
Description
D1701 D1702 7 Digital in
8 digital out
D1711 D1712 15 Digital
in/out
  
Frequency, Time and Event Inputs
RS-232
Output
RS485
Output
Description
D1601 D1602 Frequency input
D1611 D1612 Timer input
D1621 D1622 Event counter

Thermocouple Inputs
RS-232
Output
RS485
Output
Input
D1311 D1312 J thermocouple
D1321 D1322 K thermocouple
D1331 D1332 T thermocouple
D1341 D1342 E thermocouple
D1321 D1322 K thermocouple
D1351 D1352 R thermocouple
D1361 D1362 S thermocouple
D1371 D1372 B thermocouple
D1381 D1382 C thermocouple
  
RTD Inputs
RS-232
Output
RS485
Output
Input Curve
D1411 D1412 0.00385
D1421 D1422 0.00392

Thermistor Inputs
RS-232
Output
RS485
Output
Description
D1451 D1452 2252 ohm
thermistor


Current Inputs
RS-232
Output
RS485
Output
Input
D1211 D1221 10 mA
D1221 D1222 1 mA
D1231 D1232 100 mA
D1241 D1242 1 A
D1251 D1252 4 to 20 mA
  
Voltage Inputs
RS-232
Output
RS485
Output
Input
D1101 D1102 10 mV
D1111 D1112 100 mV
D1121 D1122 1 V
D1131 D1132 5 V
D1141 D1142 10 V
D1151 D1152 100 V


Bridge Inputs
RS-232
Output
RS485
Output
Description
D1511 D1512 30 mV input, 5V excitation
D1521 D1522 30 mV input, 10V excitation
D1531 D1532 100 mV input, 5V excitation
D1541 D1542 100 mV input, 10V excitation
D1561 D1562 1 to 6V input, 10V excitation


Ranges for D2000 Modules

Bridge Inputs
RS-232
Output
RS485
Output
Description
D2511 D2512 30mV input, 5V excitation
D2521 D2522 30mV input, 10V excitation
D2531 D2532 100mV input, 5V excitation
D2541 D2542 100mV input, 10V excitation
  
Frequency, Time and Event Inputs
RS-232
Output
RS485
Output
Description
D2601 D2602 Frequency input
D2611 D2612 Timer input
D1621 D1622 Event counter


Current Inputs
RS-232
Output
RS485
Output
Input
D2211 D2221 10 mA
D2221 D2222 1 mA
D2231 D2232 100 mA
D2241 D2242 1 A
D2251 D2252 4 to 20 mA
  
Voltage Inputs
RS-232
Output
RS485
Output
Input
D2111 D2112 100 mV
D2121 D2122 1 V
D2131 D2132 5 V
D2141 D2142 10 V


Software
A utility software package is available at no additional charge for the D1000 and D2000 family of products. This software provides program examples and a simple data logging program. The software may be downloaded from this web site from the "Software" link in the "Related Links" section at the bottom of this page.
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
Example of the most popular part numbers are shown below. Use the Part Number Builder beneath this table to select your exact configuration
Accessories
D1000-C9
£28.94
Availability: 7 weeks
 
Cable for connecting D1000 to serial port. 6ft cable with DB9 connector on one end and strip leads on the other end
All amounts shown in EUR, GBP, or USD
Note: Each unit is supplied with a CD ROM that includes a complete operator’s manual and Windows setup software. D1000 Series digital transmitters are also available with Modbus RTU protocol. To order transmitters Modbus RTU protocol, add suffix “M” at the end of the model number, no additional charge

Part Number Builder

Build Your Part Number Below
Option Descriptions:


(1) Model D1000 or D2000(programmable for non-linear functions) select from:
1 for D1000
2 for D2000

(2) Input Type(see range tables above) select from:
1 for voltage
2 for current
3 for thermocouple
4 for RTD/thermistor
5 for bridge
6 for frequency time and event
7 for digital I/O

(3) Input Range(see range tables above) select from:
0 for range 0(module dependent)
1 for range 1(module dependent)
2 for range 2(module dependent)
3 for range 3(module dependent)
4 for range 4(module dependent)
5 for range 5(module dependent)
6 for range 6(module dependent)
7 for range 7(module dependent)
8 for range 8(module dependent)

(4) Output select from:
1 for RS232
2 for RS485
Note: All combinations may not be valid, check spec sheet for valid part numbers.

Product Manuals:

Download D1000 operator's manual
Download D1700 - OMEGABUS DIGITAL TRANSMITTERS Operators Manual
Download D2000 - OMEGABUS DIGITAL TRANSMITTER Operators Manual
We noticed you are from the US. Visit your local site for regional offers and live support.