The OM-CP-ULTRASHOCK-EB series has been discontinued. Please see the OM-CP-SHOCK-SERIES as a possible alternative or contact our Sales department.
Click here if you want to know more about accelerometers.
is a battery powered, stand alone
temperature, pressure, humidity
and 3-axis shock recorder which
offers a battery life of up to 60
days typical. The unit measures and records
temperature, pressure and humidity
at the selected reading rates, while
shock is recorded as the peak
acceleration levels over the same
is specifically designed for
documenting dynamic environments
such as moving vehicles, trucks,
containers, ships, etc. The device
is also valuable in characterizing
environments such as production
and assembly lines of delicate
electronics, IC fabrication,
communications and computer
This is an all-in-one compact,
portable, easy to use device
that will measure and record
up to 174,762 measurements
per channel (1,572,858
measurements, total). The storage
medium is non-volatile solid state
memory, providing maximum data
security even if the battery becomes discharged.
The device can be started
and stopped directly from your
computer and it’s small size
allows it to fit almost anywhere.
makes data retrieval quick and
easy. Simply plug it into an empty
COM or USB port and our userfriendly
software does the rest.
Sensor: Semiconductor Range: -20 to 54ºC (-4 to 129ºF) Resolution: 0.1ºC Accuracy: ±0.5ºC (0 to 50ºC)
Sensor: Capacitive Polymer Range: 5 to 95% RH Accuracy: ±3% RH (±2% RH
Typical at 25°C) Resolution: 0.1% RH Specified Accuracy Range: 10 to 40°C; 10 to 80% RH
Accelerometer Type: MEMS Semiconductor Sampling Rate: 1.953 ms (512 Hz) Acceleration Frequency Response: 0 Hz to approximately 400 Hz Memory: 174,762 per channel (1,572,858 total readings) Recording Interval: 64 Hz to 5 minutes for shock, selectable in
software. Temperature, pressure and humidity sampled approximately
every 2 seconds at intervals faster than 2 seconds.
Otherwise, sampled at the reading rate. Start Mode: Immediate start or delay start, up to 180 days
from PC launch Password Protection: An optional password may be programmed into
the device to restrict access to configuration options. Data may be
read out with the password Calibration: Digital calibration through software Calibration Date: Automatically recorded within device Power: 6 D-cell alkaline (battery included), user replaceable Data Format: Date and time stamped; gravities (g and mg) °C,
°F, °K, °R, %RH, mg/ml water vapor concentration, psia, inHg, mmHg,
bar, atm, torr, Pa, kPa, MPa, Mpa Time Accuracy: ±1 minute per month at 20 to 30°C Battery Life: 60 days typical with alkaline battery,
1 minute reading rate @ 25°C Computer Interface: PC or USB (interface cable
required); 115,200 baud Software:
(VISTA 32-bit version only;
VISTA 64-bit is not supported) Operating Environment:
-20 to 54°C (-4 to 129°F) 0 to 95% RH non-condensing Dimensions:
89 H x 111 W x 26 mm D
(3.5 x 4.4 x 1.0") Weight: 2.3 kg (80 oz) Material: Anodized aluminum
† All amounts shown in EUR, GBP, or USD Note: Operator's manual and RS-232 cable are included with the OM-CP-IFC110 Windows software (required to operate the data logger and sold separately).