More information about how a Data Logger works in this link.
This standalone data logger
measures and stores up to 16,378
temperature readings over a
-35 to 80°C (-31 to 176°F) range.
The user can easily set-up the
logging rate and start-time, and
download the stored data by
plugging the data logger into a PC’s
USB port and running the purpose
designed software under Windows
XP/VISTA/7 (32- and 64-bit). Data
can then be graphed, printed and
exported to other applications. The
high contrast LCD can show a
variety of temperature information.
At the touch of a button, the user
can cycle between the current,
maximum and minimum stored
temperatures. The data logger is
supplied complete with a long-life
lithium battery, which can typically
allow logging for up to 1 year. The
data logger is protected against
moisture to IP67 standard when the
protective cap is fitted.
The user can easily set up the data
logger and download logged data by
plugging the unit into a PCs USB
port and using the supplied
Windows control software.
Easy to install and use, the control
software runs under Windows
XP/VISTA/7 (32- and 64-bit). The
software is used to set-up the data
logger as well as download, graph
and export data to Excel.
The software allows the following parameters to be configured: • Logger name • °C, °F • Logging rate (10 s, 1 m, 5 m, 30 m, 1 hr, 6 hr, 12 hr) • High and low alarms • Immediate, delayed and push-to-start logging • Display off, on for 30 seconds after button press, or
permanently on • Data rollover (allows unlimited logging periods by overwriting
the oldest data when the memory is full)
TEMPERATURE Range: -35 to 80ºC (-31 to 176ºF) Repeatability: ±0.5ºC (±0.2ºF) Resolution: 0.5ºC (1.0ºF) Accuracy:
Typical: ±0.5ºC (±1.0ºF) Max: ±1.5ºC (±3.0ºF)
Memory: 16,378 temperature readings Logging Interval: 10 sec to 12 hrs Software: Windows XP/VISTA/7 (32- and 64-bit) Operating Temperature Range:
-35 to 80ºC (-31 to 176ºF), at
temperatures below -20ºC (-4ºF)
the LCD display will exhibit slower
response times of approx 10 sec Alarm Thresholds: High/low alarm
thresholds for temperature
selectable in software Start Date/Time: Selectable in software Status Indicators (LEDs): Red, green and orange Power: 1/2 AA 3.6V lithium battery (included) Battery Life: 1 year typical, @25ºC
and 1 min logging rate (depends on
sample rate, ambient temperature
and use of LCD display) Weight: 43 g (1.5 oz) Dimensions:
119.5 L x 25.3 W x 2.21 mm D
(4.7 x 1.04 x 0.87")
† All amounts shown in EUR, GBP, or USD Note: Each datalogger is supplied with a protective cap/mounting bracket and a battery pre-installed. Software and user manual are available for download from the links above.