Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
CLOSE
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

Smart Digital interface counter/totalizer with I/O

SP-013-Series

Smart Digital interface counter/totalizer with I/O | SP-013-Series

Smart Digital interface counter/totalizer with I/O

£110.02 SP-013-1

CE
  • Pulse Rate, Pulse Width, Pulse Duty Cycle, and Pulse Delay monitoring
  • Up/Down Counter
  • 2x Digital I/O
  • Software configurable through SYNC configuration software
  • Modular M12 construction
  • OMEGA Smart Core enabled

    -Data Logging

    -Integrated Alarm and Control

    -Plug and Play Device Detection

    -Sensor health monitoring

IIoT & Wireless Systems - View related products

Description

The Layer N SP-013 Digital Interface Smart Probe provides an easy way to integrate digital pulse inputs to your Layer N Ecosystem. The SP-013 accepts digital pulse inputs through its M12 5-pin connector and Layer N Smart Interfaces through its M12 8-pin connector. The optional M12.5-S-M-FM connector can be utilized to easily connect wire leads to your SP-013.


The SP-013 may be configured to monitor the on/off state of the input signals, the pulse rate/ duty cycle of the primary input, or the pulse delay between the two signals. The pulse totalizing function supports both standard counting and up/down counting.


Edge Control and Built in I/O

The Layer N SP-013 features 2 configurable digital I/O pins.These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-013 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.


Smart Core Enabled

Smart core is integral to all Layer N Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.


Smart Interface Modularity

Customize your Layer N Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Layer N Cloud.


Intuitive Configuration

Configure your Layer N Smart Probe using SYNC’s intuitive configuration interface.


Your Data at a Glance with Layer N Cloud

Layer N Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.








Specifications


INPUT POWER

Voltage: 2.8 VDC - 3.3 VDC


DIO DIGITAL INPUTS

VinHighThreshold= 2.2 VMAX
VinLowThreshold= 0.3 VMIN
VinMAX= 30 VDC


DIO DIGITAL OUTPUTS

2x Open Drain 100 mA max
VMAX= 30 VDC


ENVIRONMENTAL

Operating Temperature: -40 to 85℃ (-40 to 185℉)
Rating: IP67 when mated


MECHANICAL

Dimensions: 22.1 mm W x 96.7 mm L (0.87” x 3.80”) not including mounting tabs


GENERAL

Agency Approvals: CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility: Compatible with OEG, SYNC configuration software, Layer N Cloud, and Modbus Networks


M12 5-Pin Wiring


Pin Frequency, Width,
Duty Cycle
Delay Up/
Down
Counter
Digital
Input
Pin 1                         3.3V Power
Pin 2 Pulse Pulse A Pulse Input 1
Pin 3                         GND
Pin 4 Enable Pulse B Direction Input 3
Pin 5 Reset Input 2

M12 8-Pin Wiring


Pin Name Function
Pin 1 DIO 0 Discrete I/O Signal 0
Pin 2 INTR Interrupt Signal
Pin 3 SCL I2C Clock Signal
Pin 4 SDA I2C Data Signal
Pin 5 Shield Shield Ground
Pin 6 DIO 1 Discrete I/O Signal 1
Pin 7 GND Power Ground
Pin 8 3.3VDD Power Supply

Layer N SP-013


Model Number Description
SP-013-1 Digital Interface Smart Probe with discrete I/O

Layer N Smart Interface

Layer N Smart Probes require a Layer N Smart Interface to operate and connect to your Layer N Ecosystem.


Model Number Description
IF-001 USB Smart Interface
IF-002 RS485/Modbus Smart Interface

Accessories

An optional M12 5-pin screw terminal adapter is available for users who wish to connect wire leads directly to the SP-013.


Model Number Description
M12.5-S-M-FM M12 5-pin screw terminal adapter
M12.8-T-SPLIT Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins
M12.8-S-M-FM M12-8 pin Straight Plug Field install connector with screw terminals
DM12CAB-8-1-RA 1m (3.3’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-3-RA 3m (9.8’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-5-RA 5m (16.4’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-1 1m (3.3’) cable dual M12-8 straight connector
DM12CAB-8-3 3m (9.8’) cable dual M12-8 straight connector
DM12CAB-8-5 5m (16.4’) cable dual M12-8 straight connector
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
SP-013-1
£110.02
Availability: 2 weeks
 
Smart Digital interface counter/totalizer with I/O
Layer N Smart Interfaces - Smart Probes must be connected to an interface to operate
IF-001
£52.59
Availability: In Stock
 
Wired Smart Probe interface with USB connection
IF-002
£108.02
Availability: In Stock
 
RS485/Modbus Smart Probe Interface with M12, 5 pin RS485 connection
Accessories-M12 8 pin cables and connectors
M12.8-T-SPLIT
£29.89
Availability: 2 weeks
 
Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins
M12.8-S-M-FM
£16.10
Availability: 2 weeks
 
M12-8 pin Straight Plug Field install connector with screw terminals
DM12CAB-8-1-RA
£30.43
Availability: 2 weeks
 
1m (3.3’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-3-RA
£41.26
Availability: 8 weeks
 
3m (9.8’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-5-RA
£49.76
Availability: 2 weeks
 
5m (16.4’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-1
£33.17
Availability: 8 weeks
 
1m(3.3’) cable dual M12-8 straight connector
DM12CAB-8-3
£37.85
Availability: 2 weeks
 
3m (9.8’) cable dual M12-8 straight connector
DM12CAB-8-5
£49.76
Availability: 8 weeks
 
5m(16.4’) cable dual M12-8 straight connector
Accessories-M12 5 pin connector
M12.5-S-M-FM
£16.95
Availability: In Stock
 
5-pin screw terminal adapter
All amounts shown in EUR, GBP, or USD

Product Manuals:

Download SP-013-Series_manual
Download SP-013-Series_QSG
We noticed you are from the US. Visit your local site for regional offers and live support.