More information about how a Panel Meters works in this link.
The DP25-RMS Series digital panel meter features high accuracy, 4 digits, and ac and true-RMS scalable inputs. The 4 digit, 14-segment alphanumeric display ensures easy reading and reconfiguration. This meter uses an integrated circuit that computes the true root-mean-square value of complex input signals. ac voltage measurements with a frequency of up to 5 kHz can be measured.
The DP25-RMS has the capability to capture and display both peak and valley levels of input signals. A dual 5 amp relay is available and can be configured to provide on/off control. An isolated analogue output is available, which can be configured for 4-20 mA or 0-10 Vdc. RS232 and RS485 communication capability is also available. The true RMS AC input makes this meter an ideal instrument for use in power monitoring, piezoelectric sensors, signal conditioning, and many other applications.
The To Order box reflects base models only. In order to configure a part number with options, use the part number builder below.
† All amounts shown in EUR, GBP, or USD Note: Individual ranges are dip switch selectable. The meter comes factory set at the highest range. Ordering Example: (1) DP25-VRMS-AR is a High Accuracy True RMS Voltage Input Indicator with Dual 5 Amp Relays and an Analogue Output Option., £342.00
Part Number Builder
Build Your Part Number Below
Input Type select from: VRMS for Voltage CRMS for Current
Options select from: Nothing(leave field blank) for No Option -A for Analogue Output -A-S2 for Analogue Output with RS232 Communications -AR for Analogue Output with Dual 5 Amp Mechanical Relays -ARS2 for Analogue Output with Dual 5 Amp Mechanical Relays and RS232 Communications -R for Dual 5 Amp Mechanical Relays -S2 for RS232 Communications -S4 for RS485 Communications
Power Options select from: Nothing(leave field blank) for 115 Vac powered -230 for 230 Vac powered
Note: All combinations may not be valid, check spec sheet for valid part numbers.