* Specify junction type: E (Exposed), G (Grounded) or U (Insulated).
(††) Specify Length in mm.
Note: For Super OMEGACLAD® XL sheaths, replace "SS" or "IN" in part number with "XL". Super OMEGACLAD®XL probes are available in Type K and N calibrations only; contact Sales for more information.
† All amounts shown in EUR, GBP, or USD
Part Number Builder
Build Your Part Number Below
Lead wire length select from: 1 for 1 metre (use this when also specifying metric probe lengths and diameters) 36 for 36 inches (use this when also specifying imperial probe lengths and diameters)
Thermocouple type select from: IC for J thermcouple CA for K thermocouple CX for E thermocouple CP for T thermocouple NN for N thermocouple
Sheath material select from: SS for Stainless steel IN for Inconel
Sheath diameter select from: IM025 for 0.25 mm IM050 for 0.50 mm IM075 for 0.75 mm IM100 for 1.0 mm IM150 for 1.5 mm 010 for 0.01 inches 020 for 0.02 inches 032 for 0.032 inches 040 for 0.04 inches 062 for 0.062 inches
Junction select from: E for Exposed G for Grounded U for Ungrounded
Probe length select from: 150 for 150 mm 300 for 300 mm 6 for 6 inches 12 for 12 inches
Connector select from: Nothing(leave field blank) for No connector(stripped end leads) -SMP-M for Subminiature miniature male connector
Note: All combinations may not be valid, check spec sheet for valid part numbers.