1/8 & 1/4 DIN Temperature/Process Autotune Controllers
with either RS-422 or RS-485.
Models: CN154, CN155, CN158, CN159
Discontinued Product

CN150 Family

1/8 & 1/4 DIN Temperature/Process Autotune Controllers

PLACE ORDER

Dual display - Process and Setpoint
Models with Either RS-422 or RS-485 Communication Standards
CSA Listed

INPUTS
Accepts 10 Types of Thermocouple, 2 RTD Types,7 Voltage and Current Input Ranges
Isolation of Inputs and Outputs

OUTPUTS
Relay, dc Pulse, Voltage or Current Output
Absolute or Deviation Alarms
Heater Break Alarm
Analog Output: Transmits Either the PV or Setpoint to a Remote Recording, Computing or Indicating Device

CONTROL OPTIONS
Autotune PID or On/Off Control
Auto/Manual Mode with Bumpless Transfer
Ability to Scale Linear mV, V or mA dc Inputs to Corresponding Engineering Units Within -1999 to 9999 Range (Decimal Point Programmable Within Same Range)
Provides Set Value Bias (Alternative Idle Setpoint Initiated by Contact Closure)

Description

The CN150 Series is no longer available. Please review the CN3251 Series as a potential substitute, or contact our sales department.

The CN150 family of controllers feature an advanced autotuning PID equation which automatically selects the optimum PID values, as well as offering the user the alternative of manually selecting the PID parameters. Units are available with either a mechanical relay, SSR driver, current or voltage outputs. When relay or SSR driver output models are specified, the user can configure the controller for on-off control. The optional alarm packages offer alarm points that can be set to any value within the input range. These setpoints can be selected by the user as either absolute or deviation alarms. To restrict unauthorized changes of control parameters, a four-level keylock feature is included.

The CN150 controller is an economical, general purpose temperature/process controller featuring dual displays (process variable and setpoint), for applications where optimal control performance is required. The ability to handle ten thermocouple types, two RTD types (Pt100) and seven voltage and current ranges in a single unit adds to the versatility of these instruments. The CN150 Series has 4-wire RS-422 and 2-wire RS-485 communications.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.

For Special Options Consult Sales or Temperature Engineering for Availability and Pricing.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

CN154MA-DC1

Consult Sales

Availability:

Qty

1/4 DIN process controller with RS485, programmable mA input, and dc pulse output

CN154MA-V1-SVB

Consult Sales

Availability:

Qty

1/4 DIN temp/process controller with RS485, programmable mA input, 0 to 10 Vdc output and set value bias

CN154V-DC1-AL1

Consult Sales

Availability:

Qty

1/4 DIN process controller with RS485, programmable voltage input, dc pulse output and hi/lo alarm

CN155TRMV-R1-ALHB2

Consult Sales

Availability:

Qty

1/4 DIN temp/process controller with RS422, programmable input of either thermocouple, RTD or millivolts input, mechanical relay output, hi alarm and a 50 A heater break alarm*

CN155V-F1-ALSVB

Consult Sales

Availability:

Qty

1/4 DIN process controller with RS422, programmable voltage input, 4 to 20 mA output, hi/lo alarm with set value bias

CN158MA-R1-AL1

Consult Sales

Availability:

Qty

1/8 DIN process controller with RS485, programmable mA input, mechanical relay output and hi/lo alarm

CN158V-V1-SVB

Consult Sales

Availability:

Qty

1/8 DIN process controller with RS485, programmable voltage input, 0 to 10 Vdc output and set value bias

CN158TRMV-F1-AL1

Consult Sales

Availability:

Qty

1/8 DIN temp/process controller with RS485, programmable input for either thermocouple, RTD or millivolts, 4 to 20 mA output and hi/lo alarm

CN159V-V1

Consult Sales

Availability:

Qty

1/8 DIN process controller with RS422, programmable voltage input and 0 to 10 Vdc

CN159MA-R1-ALHB1

Consult Sales

Availability:

Qty

1/8 DIN process controller with RS422, programmable mA input, mechanical relay output, hi alarm and a 30 A heater break alarm*

† All amounts shown in EUR, GBP, or USD
Note:
* Heater break alarms not available with F1 or V1 output types

Part Number Builder

Build Your Part Number Below

(1) (2) (3) (4)

-

RESET

Option Descriptions:

(1) PID Controllers select from:
CN154 for 1/4 DIN temp/process controller with RS485
CN155 for 1/4 Din temp/process controller with RS422
CN158 for 1/8 Din temp/process controller with RS485
CN159 for 1/8 Din temp/process controller with RS422

(2) Input Types select from:
MA for Programmable mA input
TRMV for Programmable input for either thermocouple RTD or millivolts
V for Programmable voltage input

(3) Output Options select from:
DC1 for dc pulse output
F1 for 4 to 20 mA output
R1 for Mechanical relay output
V1 for 0 to 10 Vdc output

(4) Options select from:
Nothing(leave field blank) for Standard Unit
-AL1 for Hi/lo alarm
-ALHB1 for Hi/Lo alarms and Heater break alarm* for heaters taking up to 30 A
-SVB for set value bias
-ALSVB for Hi/lo alarm with set value bias
-ALHB1SVB for Hi/Lo alarms and Heater break alarm* for heaters taking up to 30 A with set value bias
-ALHB2SVB for Hi/Lo Alarms and Heater break alarm* for heaters taking up to 50 A with set value bias
Note: All combinations may not be valid, check spec sheet for valid part numbers.

1/8 & 1/4 DIN Temperature/Process Autotune Controllers with either RS-422 or RS-485.Models: CN154, CN155, CN158, CN159 Discontinued Product

CN150 Family

1/8 & 1/4 DIN Temperature/Process Autotune Controllers
with either RS-422 or RS-485.
Models: CN154, CN155, CN158, CN159
Discontinued Product