Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

Current to Pressure (I/P) Converter


Current to Pressure (I/P) Converter - Order online | IP210

Current to Pressure (I/P) Converter - Order online

  • Loop Power
  • Ideal for Pneumatic Control Systems
  • IP65 Sealed Case
  • Zero and Span Adjustments for Field Calibration
  • Rugged Zinc Cast Housing
  • Check our low cost IP211 I/P converter here
Valves, Regulators and I/P Converters - View related products


A "current to pressure" converter (I/P) converts an analog signal (4-20 mA) to a proportional linear pneumatic output (3-15 psig). Its purpose is to translate the analog output from a control system into a precise, repeatable pressure value to control pneumatic actuators/operators, pneumatic valves, dampers, vanes, etc. The IP210 is a loop powered instrument, which eliminates the need for an external power supply.

Accuracy: 0.5% FS, IP210. IP210A 1.5 and 2.3% (see spec sheet)
Supply Sensitivity: 0.025% span per % supply pressure change
Zero Adjustment: 5% FS
Span Adjustment: 20% FS
Operating Temp.: -5 to 160°F (-20 to 70°C)
Compensated Temp.: 15 to 140°F (-10 to 60°C)
Thermal Effects: Zero: 0.06% FS/°F Span: 0.06% FS/°F
Input Resistance: <300 Ohms
Media: Oil free clean dry air filtered to 25 µm
Recommended Supply Pressure: 25-30 psig (filtered air)
Max. Supply Pressure: 80 psig
Min. Supply Pressure: 10 psi above maximum output pressure
Air Consumption (leakage): 0.03 sfcm
Flow Rate: 10 sfcm typical
Response Time: Less than 0.5 seconds (10 to 90%step)
Failure Mode: Upon electrical failure, the signal pressure falls to bleed pressure.
Pressure Port: 1 /4 " NPTF
Electrical Conn.: DIN 43650 with screw terminals included
Housing: IP65 rated, Epoxy painted zinc die castings
Construction: Nitrile diaphragms, SS/nylon flapper, nozzle, and supply valve. Integral surface mounting bracket included.
Weight:3 lb (1.7 kg)
Place Order(Specify Model Number)
Part Number/ Desc.
Consult Sales  
Current to pressure (I/P) converter with 2 wire 4-20 mA input and 3-60 psig output
Availability: 1 week
Current to Pressure (I/P) Converter with 2 wire 4-20 mA input and 3-15 psig output
Availability: 1 week
Current to Pressure (I/P) Converter with 2 wire 4-20 mA input and 6-30 psig output
Availability: 1 week
Current to Pressure (I/P) Converter with 2 wire 4-20 mA input and 2-60 psig output
Availability: 6 weeks
Current to Pressure (I/P) Converter
All amounts shown in EUR, GBP, or USD
Note: IP210-X120 uses 3 wire 4-20 mA connection with external 12 to 24 volt power supply. All other models are 2 wire loop powered models.
We noticed you are from the US. Visit your local site for regional offers and live support.