More information about how a load cell works in this link.
The LC8100 and LC8125 Series Donut Load Cell is an economical
solution to applications requiring a through-hole design. With its
extremely low profile and compact design, this load cell is ideal for
applications such as clamping forces, bolt loading forces and other
compressive loads. This series, with its all stainless steel construction
have demonstrated proven reliability in tough industrial applications.
SPECIFICATIONS Output: 2 mV/V nominal Input: 10 Vdc (15V max) Accuracy: ±1.0% linearity, hysteresis and repeatability combined Zero Balance: ±2.0% FSO Operating Temp Range: -54 to 121°C (-65 to 250°F) Compensated Temp Range: 16 to 71°C (60 to 160°F) Thermal Effects: Zero: ±0.009% FSO/°C Span: ±0.018% rdg/°C Safe Overload: 150% of capacity Ultimate Overload: 300% of capacity Deflection: 0.075 mm (0.003") nominal Input Resistance: 360 Ω minimum Output Resistance: 350 ±5 Ω Construction: 17-4 PH stainless steel Electrical: 1.5 m (5') 4-conductor shielded cable
† All amounts shown in EUR, GBP, or USD Ordering Example: (1) LC8125-200-500 is a 0-500 lb capacity load cell with 1.25, £475.00
Part Number Builder
Build Your Part Number Below
OD select from: 8100 for 1 inch OD 8125 for 1.25 inch OD
ID select from: 100 for 0.100 inch ID 125 for 0.125 inch ID 188 for 0.188 inch ID 200 for 0.200 inch ID 250 for 0.250 inch ID 312 for 0.312 inch ID 375 for 0.375 inch ID
Range select from: 5 for 0-5 lb 10 for 0-10 lb 25 for 0-25 lb 50 for 0-50 lb 100 for 0-100 lb 200 for 0-200 lb 250 for 0-250 lb 500 for 0-500 lb
Note: All combinations may not be valid, check spec sheet for valid part numbers.