Extremely Rugged Sputtered or CVD Thin Film Technology
Exceptional Long Term Stability
Reverse Polarity and Over Voltage Protected
IP67 Environmental Ratings for all Terminations
Stainless Steel Body and Wetted Parts for Harsh Environments
Excellent Shock and Vibration Ratings
0 to 5 Vdc or 4 to 20 mA Outputs Available
UL Recognised for Gage Pressure Ranges >50 psi
Sputtered Design >=100 psi
Compact 1/8 NPT Fitting
The 170 series has been discontinued. Please see the PX119 series or the PX309 series as a possible alternative or contact our Technical Sales department.
Designed for heavy duty service,
OMEGA’s PX170 Series industrial
pressure transmitters utilize two of
our precision manufacturing
techniques. Low range, models less than
100 psi gage and all absolute ranges,
use our precision CVD technology
which deposits an extremely durable,
precision solid state sensor directly
on small beam that is actuated by the
diaphragm. High range models, have the solid state
sensors sputtered directly onto the
diaphragm forming an extremely
rugged molucular bond. Gage pressure models >50 psi are UL recognised for Canada and US.
These models are designed to
give long term stability and high
performance in industrial applications.
The low range models have ±0.5%
zero and ±1% span interchangeability
and the high range models have
±0.5% zero and span interchangeability.
All models have industrial RFI, EMI
and ESD protection and their solid
state construction give them long
life in high cycle applications,
typically 100M cycles.
THREE STYLES(all Environmentally protected to IP 67) PX171 = mini-DIN Termination PX172 = M12 Connector Termination PX173 = Packard Connector Termination TWO OUTPUTS "5V" Suffix = 0 to 5 Vdc Output "I" Suffix = 4 to 20 mA Output
See the PART NUMBER BUILDER below the TO ORDER table to order the Range, Termination and Output you require.
† All amounts shown in EUR, GBP, or USD Note: Comes complete with operator’s manual.
Part Number Builder
Build Your Part Number Below
Electrical Connection select from: 1 for mini-DIN Connector 2 for M12 Connector 3 for Packard Connector
Range select from: 015A for 15 psia 030A for 30 psia 050A for 50 psia 100A for 100 psia 150A for 150 psia 200A for 200 psia VAC for -14.7 psig VAC15V for Vacuum to 15 psig VAC30V for Vacuum to 30 psig VAC50V for Vacuum to 50 psig VAC100V for Vacuum to 100 psig 015G for 15 psig 030G for 30 psig 050G for 50 psig 100G for 100 psig 150G for 150 psig 200G for 200 psig 300G for 300 psig 500G for 500 psig 1.0KG for 1000 psig 1.5KG for 1500 psig 2.0KSG for 2000 psis sealed gage 3.0KSG for 3000 psis 5.0KSG for 5000 psis 7.5KSG for 7500 psis 10KSG for 10000 psis 20KSG for 20000 psis 25KSG for 25000 psis
Output select from: 5V for 0 to 5 Vdc 3-wire Output I for 4 to 20 mA 2-wire Output
Note: All combinations may not be valid, check spec sheet for valid part numbers.