Highly Accurate, Low Pressure Industrial Transmitter

PX656

Low Pressure Industrial Transmitter

^£585.00 PX656-100DI

PLACE ORDER

IDEAL APPLICATIONS:
Boiler Inlet Air
HVAC
Industrial Fume Hoods
Level Control

Pressure Transducers - View related products

Description

Find how a Pressure Transducer works on this link or how we can customize your Pressure Sensor.

Differential Pressure Transmitter with two accuracy versions, for dry clean gases.

SPECIFICATIONS
Excitation: 12 to 36 Vdc
Output: 4 to 20 mA (2 wire)
Operating Temp: -29 to 85°C (-20 to 185°F)
Compensated Temp: -18 to 72°C (0 to 160°F)
Thermal Effects:
Zero: 0.015% FS/°F
Span: 0.015% FS/°F
Proof Pressure: 10 psi
Burst Pressure: 50 psi
Static Pressure: 100 psi
Sensor Type: Capacitance
Max Loop Resistance: (Supply voltage - 12) x 50 Ω
Calibration Report: NIST calibration at 25, 50, 75 and 100% FS; upscale and downscale provided
Response Time: 250 ms
Wetted Parts: Dry, clean non-corrosive gases only
Enclosure: NEMA 4X (IP65); 137 L x 76 W x 64 mm D (5.4 x 3 x 2.5")
Pressure Port: ¼ NPTF
Electrical Conn: Screw terminal (two ½ NPTF conduit)
Weight: 955 g (2.1 lb)

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Uni-Directional Differential Pressure Transmitter (0.3% Linearity)

Bi-Directional Differential Pressure Transmitter (0.3% Linearity) 0 = 12mA

† All amounts shown in EUR, GBP, or USD
Note: Comes with complete operator’s manual.
To Order the High Accuracy PX657, (0.15%). See Part Number Builder below.

Part Number Builder

Build Your Part Number Below

	(1)		(2)
PX65		-		DI

Option Descriptions:

(1) Accuracy select from:
6 for Standard Accuracy
7 for High Accuracy

(2) Range (inH2O) select from:
0.1 for 0-0.1
0.25 for 0-0.25
0.5 for 0-0.5
01 for 0-1
02 for 0-2
03 for 0-3
05 for 0-5
10 for 0-10
25 for 0-25
50 for 0-50
100 for 0-100
200 for 0-200
0.05B for ± 0.05
0.25B for ± 0.25
0.50B for ± 0.50
01B for ± 1
2.5B for ± 2.5
05B for ± 5
10B for ± 10
25B for ± 25
50B for ± 50
100B for ± 100

Note: All combinations may not be valid, check spec sheet for valid part numbers.