OMEGA’s PXM01 Series is a very high accuracy, 30 millivolt output, industrial pressure transducer. The all stainless steel construction makes it suitable for harsh industrial environments. FM approved intrinsically safe is standard. The PXM01 has a high operating range, a broad compensated range and excellent temperature compensation which gives stable readings in harsh applications. They are available in gauge, sealed gauge or absolute models as well as bar or psi ranges. G-1/8 or G-1/4 pressure fittings are available as well as connector or cable electrical terminations
SPECIFICATIONS Excitation: 10 Vdc (15Vdc max) Output: 3 mV/V ±0.25% Input Resistance: 350 .±10 Ohms Output Resistance: 350 .±10 Ohms Zero Balance: 1.0% FS Linearity: ±0.05% FS Hysteresis: ±0.05% FS Repeatability: ±0.05% FS Agency Approvals: Standard FM Intrinsically Safe IS/I.II.III/1/CDEFG Shunt Calibration: Value specified on Calibration sheet Sensing Element: 4 active-arm bridge, using thick film strain gauges in a hermetically sealed chamber Operating Temp Range: -73 to 163°C (-100 to 325°F) Compensated Temp Range: 16 to 71°C (60 to 160°F) Thermal Effects: Span: 0.0027% Rdg/°C Zero: 0.0027% FS/°C Proof Pressure: 150% of rated pressure Burst Pressure: 300% of rated pressure Wetted Parts: 17-4PH SS Pressure Port: G 1/4 Male/Female or G 1/8 Male/Female Electrical Connections: Style "0" = 3 m cable Style "1" = PTIH-10-6P connector Style "6" = micro DIN Mating Connector: Style "1" = PT06F-10-6S (not included) Style "6" = included Weight: 170 g (6 oz)
For special options consult Sales or Pressure Engineering.
Most Popular models are featured in the "Place Order" below.
For the full selection of all models available, see the "Part Number Builder" below the "Place Order" table.
† All amounts shown in EUR, GBP, or USD Note: 0-160 mBar and 0-400 mBar ranges are available on models with amplified outputs only.
Part Number Builder
Build Your Part Number Below
Pressure Fitting select from: MA for G 1/8 male MB for G 1/8 female MC for G 1/4 male MD for G 1/4 female
Electrical Termination select from: 0 for 3 meter cable 1 for PT1H-10-6P connector (mating connector sold separately) 5 for Lightening protected amplifier box (4-20 ma only) 6 for micro DIN connector (no shunt cal)
Pressure Range select from: 160M for 0-160 mBar 400M for 0-400 mBar 001 for 0-1 Bar 1.60 for 0-1.6 Bar 2.50 for 0-2.5 Bar 004 for 0-4 Bar 006 for 0-6 Bar 010 for 0-10 Bar 016 for 0-16 Bar 025 for 0-25 Bar 040 for 0-40 Bar 060 for 0-60 Bar 100 for 0-100 Bar 160 for 0-160 Bar 250 for 0-250 Bar 400 for 0-400 Bar
Units select from: A for Absolute Pressure G for Gauge Pressure S for Sealed Gauge Pressure
Output select from: V for mV/V Output 5T for 0-5 Volt Output 5Z for Isolated 0-5 Volt Output 10T for 0-10 Volt Output I for 4-20 mA Output
Note: All combinations may not be valid, check spec sheet for valid part numbers.