Cookies on the OMEGA websites We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
METRIC SERIES
These rugged stainless steel transducers are ideal
for industrial, automotive, or aerospace applications
where only one side of the transducer is exposed to
wet media. These wet/dry transducers deliver the great
performance characteristics of the Micro-Machined
Silicon Series Transducers at a lower price than the
wet/wet models. They can be used in test benches, filter
monitoring, air flow, factory or pneumatic air, pitot tubes,
air speed and other industrial or aerospace applications
requiring a very rugged wet/dry transducer. The solid
state silicon core will provide long, reliable service life
with excellent long term stability. To obtain their high
accuracy and stability, the PXM409 Series use state of
the art digital mapping of the temperature, pressure
and output performance of the silicon sensor in
conjunction with a custom ASIC to provide dynamic
thermal compensation across the temperature and
pressure parameters.
COMMON SPECIFICATIONS Accuracy: 0.08% BSL linearity, hysteresis and repeatability combined Minimum Resistance Between Transducer Body and Any Wire: 100 MΩ Operating Temperature: mV/V and 5 to 10 Vdc Output: -45 to 121°C (-49 to 250°F) mA Output: -45 to 115°C (-49 to 239°F) Compensated Temperature Range: 25 to 350 mb: -17 to 85°C (1 to 185°F) 1 to 70 bar: -29 to 85°C (-20 to 185°F) Thermal Accuracy: % Span Shift over compensated temperature range 25 to 350 mb:Zero/Span±1.00% 1 to 70 bar:Zero/Span ±0.50% Pressure Cycles: 1 million minimum Long Term Stability (1-Year): ±0.1% full scale typical Bandwidth: DC to 1 kHz typical Response Time: <1 ms CE Compliant: Meets EN61326-1: 2006 for industrial locations Shock: 50 g, 11 mS half sine, vertical and horizontal axis Vibration: 5-2000-5 Hz, 30 minute cycle, Curve L, Mil-Spec 810 figure 514-2-2, vertical and horizontal axis Media Compatibility: High Side: All fluids and gases compatible with 316L SS Low Side: Clean, dry, non-ionic gases Line/Static Pressure: 35 bar maximum applied to both sides simultaneously Proof Pressure (Differential):
25 mb range = 10 times range
70 mb range = 6 times range
170 mb to 50 bar ranges = 4 times range
70 bar range = 3 times range Hi Side Containment Pressure (Differential): Ranges 25 mb to 350 mb: to 70 bar Ranges 1 to 70 bar: to 200 bar Pressure Ports: G¼ male Electrical Terminations: PX409: 2 m (6') cable PX409C: 2 m (6') cable with 1/2 NPT conduit thread PX419: mini DIN (mating connector included) PX459: M12 connector Weight: 200 g (7 oz) maximum
† All amounts shown in EUR, GBP, or USD Note: Comes complete with 5-point NIST traceable calibration certificate
Part Number Builder
Build Your Part Number Below
Option Descriptions:
(1)
Electrical Termination select from: PXM409 for 2 m (6'''') cable PXM419 for mini-DIN PXM459 for M12 Connector (mating connector sold separately)
(2)
Differential Pressure Range (Bar) select from: 025H for 0-25 mbar 070H for 0-70 mbar 170H for 0-170 mbar 350H for 0-350 mbar 001B for 0-1 bar 002B for 0-2 bar 3.5B for 0-3.5 bar 007B for 0-7 bar 010B for 0-10 bar 17.5B for 0-17.5 bar 035B for 0-35 bar 050B for 0-50 bar 070B for 0-70 bar
(3)
Units select from: DWU for Wet/Wet Differential Pressure DDU for Wet/Dry Differential Pressure
(4)
Output select from: V for 10 mV/V Output 10V for 0-10 Volt dc Output I for 4-20 mA Output
Note: All combinations may not be valid, check spec sheet for valid part numbers.