Fast-Response Thermocouples with Self-Adhesive Backing

SA1-(*)-72-SC

PLACE ORDER

Self-Adhesive Backing for Easy Installation
Better Than 0.3 Second Response Time
0.9 m (36") Color-Coded PFAInsulated Leads
Rated to 175°C (347°F) Long Term
Available in J, K, T, and E Calibrations

Strain Gages, Accessories and Instrumentation - View related products

Description

OMEGA’s self-adhesive thermocouples are designed for fast measurement of surface temperature. These sensors are manufactured from 30 AWG PFA-coated thermocouple wire, with a flattened bead secured between a high-temperature polymer and a high-temperature, fiber-reinforced polymer. This combination affords good thermal conductivity and fast response. The self-adhesive backing makes installation easy; no epoxy or cement is required.
SPECIFICATIONS
Thermocouple Calibrations:
    J: Iron-constantan
    K: CHROMEGA™-ALOMEGA™
    T: Copper-constantan
    E: CHROMEGA™-constantan
Adhesive: Silicon-based cement
Max Temp: 175°C (347°F) continuous
Min Temp: -60°C (-75°F) continuous
Laminates: High-temperature polymer, fiberglass-reinforced polymer layers
Wire: 0.9 m (36") leads, 30 AWG PFA coated

† All amounts shown in EUR, GBP, or USD

Part Number Builder

Build Your Part Number Below

(1)		(2)	(3)	(4)
	SA1-

Option Descriptions:

(1) Number of Thermocouples select from:
5 for 5 pack

(2) Thermocouple Type select from:
J for J Thermocouple
K for K Thermocouple
T for T Thermocouple
E for E Thermocouple

(3) Length select from:
Nothing(leave field blank) for 36" long
-72 for 72" long

(4) Ending select from:
Nothing(leave field blank) for Stripped Ends
-SC for Spool Connector

Note: All combinations may not be valid, check spec sheet for valid part numbers.