The SV130 Series direct-acting
solenoid valves consist of a coil,
plunger, and sleeve assembly. In a
normally open valve, a plunger
return spring holds the plunger
away from the orifice, allowing flow through the valve. When current
flows through the coil, a magnetic
field is produced and it turns the
stop into an electromagnet that
attracts the magnetic plunger.
This action compresses the return
spring and brings the plunger
against the orifice to prevent
flow through the valve.
SPECIFICATIONS Wetted Parts: Stainless steel, copper, and seal
Medium: Liquid or gases
Max Static Pressure: 1.5 times max psid, vacuum (>5 microns ABS)
Ambient Temp: -9 to 50°C (15 to 122°F)
Mounting: Pipe mounting, any direction
Power: 10 W, 120 Vac coils, 50 to 60 Hz
Weight: 500 g (1.1 lb)
† All amounts shown in EUR, GBP, or USD
We noticed you are from the US. Visit your local site for regional offers and live support.