TWO WAY VALVES Two-way solenoid valves cover most industrial laboratory applications. A two-way valve controls the flow of fluids through a single passage. It has two ports, an inlet (1) and an outlet (2). A normally closed valve does not pass fluid unless it is energized. A normally open valve operates in the opposite manner.
SPECIFICATIONS Wetted Parts: SV-100 Series: stainless steel, copper and seal; SV-200 Series: brass, stainless steel, copper and seal. Medium: Liquid or gases (SV-101-105, 107-113, Filter 40 microns) Max. Static Pressure: 1.5 times max. psid, vacuum (>5 microns ABS) Ambient Temp.: 15 to 150°F (-9 to 50°C) Mounting Pipe mounting, any direction Power: 10 Watts, 120 Vac coils, 50-60 Hz
SPECIAL PURPOSE SOLENOID VALVES For Steam, Hot Water, Anti-Water Hammer, 3-Way, 4-Way and Selectable Service 3-WAY CONTROL A three-way valve is normally used to control larger values; it has an inlet port, an exhaust port, and a common cylinder port. 4-WAY CONTROL A four-way valve has an inlet port (1), two cylinder ports (2 and 4), and two exhaust ports (3 and 5). They are generally used to control double-acting actuators.
SPECIFICATIONS Wetted Parts: SV-200: brass, stainless steel, copper and seal (SV-242 Delrin additional) (SV-271: aluminum, Delrin, stainless steel, copper, and seal) (SV-281,-282, FKM additional). Medium: Liquids or gases Max. Static Pressure: 5 x Max psid Ambient Temp.: 15 to 122°F (-9 to 50°C) Mounting: Pipe mounting, any direction Power: 10 watts, 120 Vac, Class F (PV-231 to 235, 22 watts, 120 Vac Class H)
† All amounts shown in EUR, GBP, or USD Note: All SV100 and SV200 sereis valves are 110 Vac powered. For 220 Vac power purchase replacement coil separately.
We noticed you are from the US. Visit your local site for regional offers and live support.