These PFA insulated wire probes are hermetically seal-welded at the tip to give a continuous PFA coating along the entire length. Omega's unique manufacturing process produces no increase in diameter or change in shape at the tip, allowing the sensor to be installed into areas of limited space. Supplied as standard with stripped ends.
The most popular models are shown in the To-Order table below, there are a number of lead length and connector options, please see the pdf data sheet for details and use the part number builder below to order specific items.
† All amounts shown in EUR, GBP, or USD Ordering Example: (1) HSTH-44031-1M Hermetically sealed 10k ohm thermistor probe, 1m long, with stripped ends., £31.00
Part Number Builder
Build Your Part Number Below
NTC Element Type select from: 44033 for 2252 ohms 44034 for 5k ohms 44031 for 10k ohms
Lead Length select from: 1M for 1 metre 2M for 2 metres 3M for 3 metres 5M for 5 metres
Termination select from: Nothing(leave field blank) for Stripped ends -PP for 1/4 inch phono jack plug
Note: All combinations may not be valid, check spec sheet for valid part numbers.