NMP is available as a Legacy design.
The most current design is SMPW-CC . The demand for the SMPW version results in a lower initial cost. Features of the SMPW version produce a better finished thermocouple with reduced wire assembly time.
View the features benefits and cost advantage of the current design, SMPW-CC-( )-( ), with the integral cable clamp.
† All amounts shown in EUR, GBP, or USD Note: To order, specify "M" for male connector only, or "F" for female connector only.
Order male and female separately to create pairs.
Ordering Example: (1) NMP-K-F Miniture female connector, type K, £2.00
Part Number Builder
Build Your Part Number Below
Thermocouple Type select from: K for Type K T for Type T J for Type J E for Type E R/S for Type R or S G for Type G C for Type C D for Type D U for Uncompensated or Type B N for Type N
Connector Contact select from: M for male connector F for female connector
ROHS select from: Nothing(leave field blank) for Non-ROHS -ROHS for ROHS
Note: All combinations may not be valid, check spec sheet for valid part numbers.