Omega SMPW thermocouple connectors are 2 pin flat mini TC plugs and sockets designed to connect temperature sensor instrumentation with a temperature controller or process control HMI automation panel. Compatible with any other similarly sized 2 pin Male TC plug or female 2 pole TC socket.
This thermocouple connector design is ideal for fast and easy connection of TC wire or thermocouple cable via a TC cable clamp assembly. The cap/clamp contains the 4 captive screws and eliminates the small loose screws typical with the traditional metal thermocouple cable clamp.
Included are a metal clamp plate , strain relief and grommets
To greatly reduce assembly time use part # SMP-CC-TOOL assembly tool holding fixture with the SMPW-CC connector and integral cable clamp. This combination results in fast reliable TC connection.
Our most popular models are listed in the "to order" table. Please use the "Part Number Builder" below to order other models
† All amounts shown in EUR, GBP, or USD Note: Our most popular models are listed in the "to order" table. Please use the "Part Number Builder" below to order other models
Part Number Builder
Build Your Part Number Below
Calibration select from: J for Type J black KI for Type K IEC Green K for Type K ANSI yellow TI for Type T IEC brown T for Type T ANSI blue E for Type E purple C for Type C red R/SI for Type R/S IEC orange R/S for Type R/S ANSI green U for Uncompensated white NI for Type N IEC pink N for Type N ANSI orange
Connector Type select from: M for Plug Only F for Socket Only MF for Plug/Socket Pair
Note: All combinations may not be valid, check spec sheet for valid part numbers.