Improved Cable Clamp Design:
Strain relief and cable clamp needs have traditionally been accomplished by a (legacy style) metal PCLM clamp with numerous small loose parts. Based on input from current users plus recent automation developments TC cable clamp design and assembly has greatly improved.
The OSTW-CC cable clamp has reduced the assembly time by 2/3's and made all the loose screws captive. Combined with a lower initial cost the OSTW-CC has proven to be a reliable economical choice when cable clamp strain relief is required.
The OSTW-CC- ( )-125 clamp cap comes in all TC calibrations. The 5 pack contains all the parts required as a direct replacement for PCLM assembly items. Option -250- size for up to 1/4" BX cable clamp . For OEM quantity bulk packs contact OEM sales.
See the model OST-CC-TOOL Fast Assembly Sequence diagram below. This tool holds any OST series connector and the CC series clamp parts. This holding tool allows the technician to complete the connector and cable clamp assembly from the top side without holding the loose parts or turning the connector.
Complete TC connector OSTW-CC-( )-( ) with the integral cable clamp strain relief click this link.
Wire Caddy (Spool Cap)
USTW, OSTW, OST, HST, HSTW
*Insert thermocouple calibration: J, K, T, E, R/S, N or U (Uncompensated)
Dual Element Tube Clamp
USTW, OSTW, UST, OST, OGP, HST, HSTW
*Insert probe diameter: “116” for 1/16", “18” for 1/8", “316” for 3/16", or “14” for 1/4"
USTW, OSTW, UST, OST, OGP, GST, HST, HSTW, HGST
*Insert probe diameter: “116” for 1/16 ", “18” for 1/8", “316” for 3/16", or “14” for 1/4"
† All amounts shown in EUR, GBP, or USD Ordering Example: (1) DX-BRLK-14 dual tube clamp for 1/4 " probes, £4.80
Part Number Builder
Build Your Part Number Below
Wire Caddy(see tables above) select from: OSTW-SC- for wire caddy(spool cap) GST-SC- for wire caddy(spool cap)
Thermocouple Calibration select from: J for thermocouple calibration J K for thermocouple calibration K T for thermocouple calibration T E for thermocouple calibration E R/S for thermocouple calibration R or S N for thermocouple calibration N U for thermocouple calibration U
Note: All combinations may not be valid, check spec sheet for valid part numbers.