Omega's high accuracy piezoresistive pressure transducers have a
proven record in high performance commercial and
aerospace applications for over 25 years. The
piezoresistive process uses strain gauges molecularly
embedded into a highly stable silicon wafer. The silicon
wafer is diced into individual die which each contain a
full strain gauge bridge. The die is mounted in a sealed
chamber protected from the environment by glass to
metal seals and a stainless steel diaphragm.
A small volume of silicone oil transfers the pressure from
the diaphragm to the strain bridge. The construction
provides a very rugged transducer with exceptional
accuracy, stability and thermal effects. A unique design
ruggedizes the transducers by providing secondary fluid
containment in the event of a diaphragm rupture.
During our production process, automated test
equipment performs pressure and temperature cycling
on 100% of the PXM409 series transducers. The transducers
are then calibrated using extremely high accuracy
standards and a 5-point traceable calibration certificate is included with each transducer. The inherent stability of the piezoresistive core provides
excellent long term stability, repeatability and very low
thermal effects at the price of much lower performance
transducers. Standard features of the PXM409 Series
also include protective features built into the electronics
and the pressure element. Reverse polarity, EMC, and
power supply fluctuation protection are standard on all
models. Intrinsically Safe and CSA ratings are optional.
Specifications, Dimensions and Output Options
Accuracy: Standard ±0.08% FS, BSL, Linearity, Hysteresis and Repeatability Combined
(compound ranges calibrated only in positive direction) Operating Temperature: mV/V Output: -45 to 121°C Amplified Output: -45 to 115°C Compensated Temperature Range: 25 to 350 mB: -18 to 85°C 1 to 350 bar: -29 to 85°C Thermal Accuracy: % span shift over compensated temperature range 25 to 350 mB: Zero: ±1.0% max Span: ±1.0% max 1 to 350 bar: Zero: ±0.50% max Span: ±0.50% max ROHS Compliant
Minimum Isolation Between Case and Terminations: 100 MΩ @ 50 Vdc Pressure Cycles: 1 million, minimum Long Term Stability (1-Year): ±0.1% FS typical Shock: 50 g, 11 ms half sine shock, Vertical and Horizontal Vibration: 5-2000-5 Hz 30 minute cycle, Curve L, Mil Spec 810 figure 514-2-2,
Vertical and Horizontal Bandwidth: DC to 1 kHz typical Response Time: <1 ms CE Compliant: Industrial Level Emissions: IEC550022 Class B Electrostatic Discharge Immunity: IEC1000-4-2 EM Field Immunity: IEC61000-4-3 EFT Immunity: IEC61000-4-4 Surge Immunity: IEC61000-4-5 Conducted RF: IEC610000-4-6 Rate Power Frequency Magnetic Field: IEC61000-4-8 Environmental Protection: PXM409: IP67 PXM419: IP65 gauge, IP67 Absolute PXM459: IP65 gauge, IP67 Absolute
Proof Pressure Gauge/Vac/Compound: 25 mB: 10 times span 70 mB: 6 times span 170 mB to 100 bar: 4 times span 175 to 350 bar to 500 bar max Proof Pressure Absolute: 350 mB to 100 bar: 4 times span 175 to 350 bar: to 500 bar max Secondary Containment; Gauge/Vac/Compound: 25 to 350 mB: to 70 bar 1 to 70 bar: to 200 bar 100 to 350 bar: to 700 bar Absolute/Barometric: 350 mB: to 70 bar 1 to 70 bar (includes barometric ranges): to 200 bar 100 to 350 bar: to 700 bar Wetted Parts: 316L SS Pressure Port: G1/4 (1/4" BSPP) Weight: 115 to 200 g depending upon configuration Electrical Outputs: mV/V Output: Output: 10 mV/V ratiometric Supply Voltage: 5 to 10 Vdc (5 mA @ 10 Vdc) Input/Output Resistance: 5000 Ω ±20% Voltage Output:
Output: 0 to 10 Vdc Supply Voltage:15 to 30 Vdc @ 10 mA (±10 Vdc or compound) Current Output: Output: 4 to 20 mA (zero pressure = 12 mA on compound ranges) Supply Voltage: 9 to 30 Vdc (9 to 20 Vdc from 105 to 115°C) Max Loop Resistance Ω: (Vs-9) x 50 Zero Balance: Ranges > 170 mB: ±0.5% typ. (1% max) Ranges ≤ 170 mB: ±1% typ. (2% max) Span Setting: Ranges > 170 mB: ±0.5% typ. (1% max) Ranges ≤ 170 mB: ±1% typ. (2% max)
The table below features transmitters with popular pressure ranges, 4-20 mA outputs and micro DIN connector.
To order other pressure ranges and/or output types see the Part Number Builder below the table.
Still can't find the right model? Specify the perfect transducer for your application with this easy, step-by-step configurator.
† All amounts shown in EUR, GBP, or USD Note: All models come with a NIST traceable calibraton certificate. Ordering Example: (1) PXMW-4 1/4, £2.10 plus (1) PXM409-007BGV 0.08% accuracy, G 1/4 Thread, 7 bar range, 10 mV/V output, 2 metre cable, £369.00, £2.10 + 369.00 = £371.10
Part Number Builder
Build Your Part Number Below
Electrical Termination select from: 0 for 2m cable 1 for mini DIN 5 for M12 4-pin male connector
bar Range - Not all ranges are available for every pressure type select from: 025H for 25 mbar 070H for 70 mbar 170H for 170 mbar 350H for 350 mbar 1100H for 0 to 1100 mbar (barometric models only) 550H for 550 to 1100 mbar (barometric models only) 880H for 880 to 1100 mbar (barometric models only) 001B for 1 bar 002B for 2 bar 3.5B for 3.5 bar 007B for 7 bar 010B for 10 bar 17.5B for 17.5 bar 035B for 35 bar 050B for 50 bar 070B for 70 bar 100B for 100 bar 175B for 175 bar 245B for 245 bar 350B for 350 bar
Pressure Type select from: G for Gauge A for Absolute V for Vacuum CG for Compound Gauge B for Barometric
Output select from: V for 10 mV/V 10V for 0 to 10 Vdc I for 4 to 20 mA
Note: All combinations may not be valid, check spec sheet for valid part numbers.