The PR-12 series has been updated with low, high, and extreme temperature ranges; all of the new models will be PR-12(L,H,E)*. The older models have been discontinued.
Our PR-12 series probe with chemical-resistant cast iron protection head and screw-on cap includes PT100 Ω platinum RTD element or PT1000 RTD element, 1/2" NPT mounting threads and sheath of 316 stainless steel. When properly sized, these can go directly into and bottom out in a thermowell. All probes include a screw terminal block for easy connection of insulated copper extension wire. Replacement probes (without head assembly) are available as well as a "spring-loading" option which allows for the probe to bottom out in a thermowell for quicker and more accurate response.
† All amounts shown in EUR, GBP, or USD
Part Number Builder
Build Your Part Number Below
RANGE select from: L for LOW (-50 to 250°C) H for HIGH (-50 to 450°C) E for EXTREME (-200 to 600°C)
NUMBER OF WIRES select from: 3 for 3 WIRE 4 for 4 WIRE
OHMS select from: 100 for 100 OHMS 1000 for 1000 OHMS
SHEATH DIAMETER select from: 1/8 for 1/8" DIAMETER 3/16 for 3/16" DIAMETER 1/4 for 1/4" DIAMETER
SHEATH LENGTH select from: 2 for 2 INCHES 3 for 3 INCHES 4 for 4 INCHES 6 for 6 INCHES 9 for 9 INCHES 12 for 12 INCHES 18 for 18 INCHES 24 for 24 INCHES
OPTION 1 select from: Nothing(leave field blank) for STANDARD -TX for TEMPERATURE TRANSMITTER 0 TO 100°c -TX12-TX-SCALED for TRANSMITTER SPECIALLY SCALED.
OPTION 2 select from: Nothing(leave field blank) for STANDARD -SL for SPRING-LOADED
OPTION 3 select from: Nothing(leave field blank) for STANDARD -RP for REPLACEMENT PROBE
Note: All combinations may not be valid, check spec sheet for valid part numbers.
We noticed you are from the US. Visit your local site for regional offers and live support.