Omega’s magnetic-mount RTD surface temperature
sensors are available with Pt100, Pt1000 and Pt500 elements. Four wire
configuration is standard and
a wide range of lead
wire insulations and terminations are available. Maximum
temperature for the magnet is 300°C .
The most popular models are shown in the "To-Order" table below. Use the PDF specification
sheet in the related links section at the bottom of this page
to specify a sensor for your exact requirements and contact
our sales department to order.
† All amounts shown in EUR, GBP, or USD Note: Magnetic sensors are available with a variety of cable insulation types. For a list of the cable options, and ordering information, see the Part Number Builder below.
For cable lengths greater than 1 metre, change cable length (in metres) in the model number to the required length and add the additional cost per metre. Ordering Example: (1) PRMAG-2-100-A-TS-1M Magnetic Pt100 Class A Sensor with 1 metre of PFA Insulated, screened, 4-wire Cable, £84.00
Part Number Builder
Build Your Part Number Below
Wire Options select from: P for PVC Insulated Cable (100°C Max) T for PFA Insulated Cable (250°C Max) G for Fibreglass Insulated Cable (400°C Max) GS for Fibreglass Insulated Cable with SS Overbraid (400°C Max) PS for PVC Insulated Cable with internal tinned-copper screen (100°C Max) TS for PFA Insulated Cable with internal tinned-copper screen (250°C Max) S for Silicone Insulated Cable (200°C Max)
Note: All combinations may not be valid, check spec sheet for valid part numbers.